You can even create your own Command Menu and with one click put all your favorite programs right under the cursor! Connecting and Locating the IR Receiver The IR receiver connects to your computer in the same way as a conventional mouse allowing you to place the receiver wherever is convenient on your desktop. 1. Locate the round 6-pin PS/2 mouse port on the back of your computer. 2. Insert the PS/2 connector into the PS/2 port. Locating the IR Receiver We recommend that you attach the receiver

OPERATION IS SUBJECT TOTHE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a reside

• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1).

Switch frequency channels to prevent interference from other RF pointing devices. (See the following section for more information.) - 2 - PDF ... "FinePrint pdfFactory Pro" ..... Wireless Optical Zoom Mouse Selecting the Frequency Channel The RF-Mouse operates on two frequency channels. To prevent interference when using two RF Mice in close proximity, a different frequency channel should be used for each mouse. Refer to the following instructions to change the frequency channel for your mouse:

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res

l• Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device mat not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. — 1

• Part Two is Keystrokes. Let’s enjoy all the innovative features of the mouse step by step as follows : image A image B Section I: Change Mouse DPI :Set mouse XY axis sensitivity levels In order to Shift from pixel-precise targeting to fast-twitch maneuvers, without stopping the action. This avoids the error in operation for more efficiency. You can configure your mouse as synchronism or non-synchronism higher/lower with many parameters to control the X/Y dpi by yourself in this smart X7 Softwa

You will see a mouse icon “” appear on the bottom right of your task bar (near the clock area) Mouse Properties Window 9. Double click on the mouse icon “” will bring you the mouse property (figure on the right) If the mouse image appears in the mouse properties menu looks exactly the same as the mouse on hand, then this means that you have successfully installed the 6K-Works. 7. Restart your computer after the driver has been installed STEP TWO: HOW TO PROGRAM YOUR MOUSE BUTTONS MOUSE Propertie