Войти:
Оценок - 3, средний балл: 3.3 ( )

Инструкция по эксплуатации Barco, модель D320PL

Производитель: Barco
Размер: 1.34 mb
Название файла: dde9e92e-09be-4d16-a979-86f4eaa26fb8.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Description R9850980 D320PL Digitizer HDSDI input module R5976470 D320PL DIGITIZER 13122002 4. Input modules 4.4 CVBS / S-VID input module Technical info: • Video (BNC) -CVBS : 1Vpp ±3dB (0,7V Video +0,3V Sync) 75 Ohm termination. -BNC loop through connector. • S-Video (4 pins DIN) -Y : 1Vpp ±3dB (0,7V Video +0,3V Sync) 75 Ohm termination. -U/V : 0,7Vpp ±3dB 100% color base, 75 Ohm termination. -Chroma : Multi-Standard (PAL / SECAM / NTSC). -4 pins DIN loop through connector. • Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or intermittent film detection. • When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the system acknowledges the module. Image4-7 Image4-8 Orderinfo: Article No. Description R9850920 D320PL Digitizer CVBS / S-VID input module 4.5 YUV / RG(s)B input module Technical info: • Component Video (BNC) -R-Y : 0,7Vpp ±3dB 75 Ohm termination. -Ys : 1Vpp ±3dB (0,7V Luma +0,3V Sync) 75 Ohm termination. -B-Y : 0,7Vpp ±3dB 75 Ohm termination. • RG(s)B (BNC) -R : 0,7Vpp ±3dB 75 Ohm termination. -G(s) : 1Vpp ±3dB (0,7Vpp G + 0,3Vpp Sync) 75 Ohm termination. -B : 0,7Vpp ±3dB 75 Ohm termination. • 3 BNC’s loop through connectors. • Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or intermittent film detection. • When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the system acknowledges the module. R5976470 D320PL DIGITIZER 13122002 4. Input modules Image 4-9 Image 4-10 Order info: Article No. Description R9850940 D320PL Digitizer YUV / RG(s)B input module 4.6 RGB analog input module Technical info: • Sub D15 connector for input and loop through. • R, G, B, Hsync, Vsync : 0 to 1 Vpp ±3dB 75 Ohm termination. • Black level : 300mV. • Sync-tip : 0V • Resolution : SXGA and UXGA version available. • Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or intermittent film detection. • When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the system acknowledges the module. Image 4-11 Image 4-12 Order info: Article No. Description R9850950 D320PL Digitizer RGB analog SXGA input module R9851710 D320PL Digitizer RGB analog UXGA input module R5976470 D320PL DIGITIZER 13122002 19 4. Input modules 4.7 Dummy input module Technical info • Dimensions : 103 x 181 x 41(W x D x H) Image 4-13 Image 4-14 Order info: ArticleNo.DescriptionR9850930D320PLDigitizerdummyinputmodule R5976470 D320PL DIGITIZER 13122002 5. Cables and accessories for the D320PL Digitizer 5. CABLES AND ACCESSORIES FOR THE D320PL DIGITIZER 5.1 Cables and accessories List with available cables and accessories Article No. Description Image R326103 Power cable with CEE7 plug. image 5-1 R3261115 Power cable with NEMA 5–15 plug. image 5-2 B5580491 Data cable with RJ12 connectors for RS232 connection between local control PC and COM1 RS232 input port of the master Digitizer. Also used to connect the COM2 or COM3 port with the COM1 port of the following Digitizer. image 5-3 Z3498421 RJ12–SUBD adapter. image 5-4 R9827560 Data cable with SUBD connectors for RS232 connection between local control PC and COM1 RS232 input port of the master Digitizer. image 5-5 Z3499209 One meter data cable with MDR connectors. Used to make a connection between the LOOP OUT connector of the previous Digitizer and the LOOP IN connector of the next Digitizer. image 5-6 R9851210 Five meter data cable with DVI connectors. Used to connect the LED-WALL / PROJECTOR OUTPUT with an ILite display. image 5-7 R9851216 Five meter data cable with one DVI connector and one waterproof MDR connector. Used to connect the LED-WALL / PROJECTOR OUTPUT with an DLite display. image 5-8 B558072 DVI-VGA adaptor. Used to connect the LED-WALL / PROJECTOR OUTPUT connector on the rear side of the Digitizer with a VGA cable from the projector or monitor or plasma ... image 5-9 R9851219 One meter data cable with one DVI connector and one MDR connector. Used to connect the LED-WALL / PROJECTOR OUTPUT with a Fiberlink Transmitter. image 5-10 Image 5-1 Image 5-2 Image 5-3 R5976470 D320PL DIGITIZER 13122002 5. Cables and accessories for the D320PL Digitizer Image 5-4 Image 5-5 Image 5-6 Image 5-7 Image 5-8 Image 5-9 Image 5-10 R5976470 D320PL DIGITIZER 13122002 6. Configuration schemes 6. CONFIGURATION SCHEMES 6.1 Stand alone configuration Scheme Image 6-1 One D320PL Digitizer is sufficient to drive one Barco LED wall with four different sources. How to set up a D320PL stand alone configuration 1. Connect the RS232 communication port of the local control PC with the COM1 RS232 input port of the D320PL Digitizer. 2. Connect the LED-WALL / PROJECTOR OUTPUT from the D320PL Digitizer with the display. 3. Provide the available video sources to the D320PL input modules. 4. Configure the D320PL Digitizer and the Display with...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории