Войти:
Оценок - 5, средний балл: 3.8 ( )

Инструкция по эксплуатации Wacom, модель Cintiq DTZ-2000W

Производитель: Wacom
Размер: 1.63 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


See page 62 for signal specifications. Auto-sync: When connected as a VGA display, Cintiq attempts to automatically synchronize to the incoming signal. At the native resolution of 1680 x 1050, the vertical refresh frequency must be set to 60 Hz. For other resolutions, auto-sync will function when the horizontal frequency is between 30 to 82 kHz and the vertical frequency is between 50 to 75 Hz. If a specific resolution and vertical refresh frequency are not supported, you will see an “out of scan range” message. In this case choose a different resolution or refresh frequency. The auto-sync function automatically sets the horizontal and vertical screen position, as well as pitch and phase. If Cintiq does not automatically synchronize with the incoming signal, you can open the OSD menu, go to the RESET menu, and select the AUTO ADJUST option to initiate display synchronization. Additional screen display adjustments can be manually made using the OSD controls. Color calibration: Changing the color, color temperature, contrast, brightness, or backlight from their default settings will invalidate the ICC color profile that was included on the driver CD. Working with on screen display settings Cintiq is equipped with an On Screen Display (OSD) function. The OSD function enables you to adjust and optimize a variety of display settings at the touch of a button. The OSD controls are located on the back of the unit. Simply reach over the top of the display unit to locate the buttons with your fingers. Note: Braille-style dots above the buttons help you to identify each one by touch. MENU button Use this button to open or close the OSD menu. Selection buttons Use these buttons to select an option that can then be Digital/Analog (DVI/VGA) switch (up) (down) ENTER button Activates or deactivates the selected OSD menu option. activated when you press the ENTER button. After activating a selected option, press the up button to increase a selected item value, and press the down button to decrease it. Customizing Page 36 The basic process for working with the OSD is as follows: • Press the MENU button to open the OSD main menu. • Use the up or down buttons to select an option. When the option you want to adjust is highlighted, press the ENTER button. The current settings and adjustment sub-menu for that option will appear. • Use the up or down buttons to adjust the option settings. • When you have made your changes, press the ENTER button to save. To exit, press the MENU button. Note: All settings are automatically saved when the OSD menu closes and will be used the next time the unit receives a similar video signal. This is applicable to all display modes. If you make changes to the display appearance and cannot return to the original settings, use the RESET RECALL option to return Cintiq to its original factory defaults. When you open the On Screen Display (OSD), the following menu options are displayed as icons: CONTRAST. Select to BRIGHTNESS. Select to increase or decrease increase or decrease image contrast. image brightness. PHASE. (VGA only) Select to reduce or eliminate horizontal distortion lines. To automatically adjust, use the RESET option. HORIZONTAL CENTER. (VGA only) Select to move the screen image left or right. To automatically adjust, use the RESET option. PITCH. (VGA only) Select to reduce or eliminate vertical distortion lines. To automatically adjust, use the RESET option. VERTICAL CENTER. (VGA only) Select to move the screen image up or down. To automatically adjust, use the RESET option. MENU POSITION. LANGUAGE. Select to Select to move the choose a language OSD menu around the option for the OSD. display screen. Customizing Page 37 SETUP. Select to adjust the display screen backlighting and OSD menu display options. BACKLIGHT. Increases or decreases the backlight brightness level. TRANSPARENCY. Adjusts the transparency of the OSD menu. TIME OUT. Sets the display time of the OSD menu, in seconds. SCALE. Enables you to choose how the image is displayed when working at resolutions below 1680 x 1050. FULL resizes the image to fill the whole screen. 1:1 displays the image at the actual resolution. ASPECT resizes the image to fill as much of the screen as possible while maintaining the correct aspect ratio. RESET. Provides two options. • Use AUTO ADJUST to reset only the image parameters. • Use RECALL to reset all screen options to the factory default. Selecting the exit icon exits the RESET window without resetting anything. COLOR. Provides settings for 9300°, 6500°, and 5000° Kelvin. DIRECT displays the colors directly from the video card without any adjustment. When selected, the BRIGHTNESS and CONTRAST settings are also set to DIRECT and cannot be adjusted manually. Also provides a CUSTOM option that enables you to adjust Red, Green, and Blue independently. Choose a setting to work with and press ENTER to activate your selection. Change the CUSTOM setting by selecting the enter icon. In the custom COLO...

Эта инструкция также подходит к моделям:
Устройства ввода - Cintiq 20WSX (1.63 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории