Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации Wacom, модель Intuos2 XD-0608-U

Производитель: Wacom
Размер: 2.16 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Tap twice on this icon with your pen tip to automatically set double-click distance and speed based on the way you normally double-click. CUSTOMIZING Page 56 Contents Index CUSTOMIZING BUTTONS Select the BUTTONS tab to change side switch, and Intuos2 Pen or Airbrush. If you are using you can also the fingerwheel sensitivity. For each tool button, a pull-down menu enables you to choose the Select the function to perform when using the eraser. Select the function to perform when pressing the upper side switch. Select the function to perform when pressing the lower side switch. Click here to change the function assigned to the pen tip. The tip must be set to left click in order to draw in most graphics applications. CUSTOMIZING Page 57 Contents Index Button Functions Each button has menu that allows you to choose when button is pressed. The following list describes all available functions. However, some options available for all buttons or tools. • LEFT-CLICK. Default setting for the Intuos2 Pen or Airbrush tip. This option simulates a left mouse button click. Be sure at least one performs this function so you can always navigate and click. • LEFT DOUBLE-CLICK. Default setting for the upper position of When this option is selected, pressing the switch simulates a left mouse button double-click. For easier double-clicking, use this function instead of tapping pen or airbrush tip. • RIGHT-CLICK. Default setting for the lower position of the side switch. This simulates a right mouse button click. • MIDDLE-CLICK. Simulates a middle mouse button click. • LEFT CLICK-LOCK. Simulates holding down the left mouse button. Press the tool button once to initiate click lock. Press the button again to release click lock. Click lock is useful for dragging objects or selecting blocks of text. CUSTOMIZING Page 58 Contents Index • KEYSTROKE.... Enables you to of When select DEFINE KEYSTROKE dialog box appears. There, you can enter or keystroke sequence play back. Keystroke combinations numbers, function keys (such as modifier keys (such as SHIFT, ALT, or CTRL). After defining sequence, click OK. Important: Because the ENTER key can be selected it cannot be used select OK. You must use your tool to click on the OK button. CUSTOMIZING Page 59 Contents Index • MODIFIER.... Enables you to s) (such ALT, or CTRL). Many applications use modifier to constrain the size or placement If you select MODIFIER dialog box appears. There, you select the s) to simulate. You can select the CLICK box plus one or more modifier key options to define the function you want your tool button to simulate. CUSTOMIZING Page 60 Contents Index • PRESSURE HOLD. Sets at level until the is For example, you can paint reach the brush size that you like. You can then and continue painting brush until the is released. • MODE TOGGLE.... Toggles between Pen Mode and Mouse Mode. When first setting to MODE TOGGLE..., the MOUSE SPEED dialog box is displayed where you can adjust the mouse acceleration and speed. Sets the screen cursor speed when in MOUSE MODE Sets the screen cursor acceleration when in MOUSE MODE. Note: Mouse speed settings can be accessed from a number of different locations within the control panel. However, for each input tool and application that you are customizing, only one MOUSE SPEED and ACCELERATION setting can be made. CUSTOMIZING Page 61 Contents Index • POP- UP MENU. Displays a Pop-up on your screen. See Customizing up for more information. • ERASE. Default setting the eraser. Refer to Erasing for information on using • IGNORED. (Intuos2 Pens and Airbrush only.) Disables the button function. • APPLICATION DEFINED. (2D Mouse, 4D Mouse, or Lens Cursor only.) Only the button number is reported to your application. Use this setting when built-in support for tool buttons. For example, CAD programs that support tablets can assign their own functions to a button. CUSTOMIZING Page 62 Contents Index Airbrush Settings The Intuos2 is equipped tip, a fingerwheel, and Button functions Additionally, the fingerwheel sensitivity range can be customized to suit your preference. MAXIMUM is the default setting, and requires you to move the wheel over its full range to achieve maximum effect. INTERMEDIATE requires a medium amount of wheel movement to achieve maximum effect. MINIMUM requires the least amount of wheel movement to achieve maximum effect. In supporting applications, the fingerwheel can be used to control ink flow, brush size, opacity, or other variables. Reducing the fingerwheel range allows you to achieve the same effect with less finger movement. Move the wheel forward for less effect and move it back for more effect. Visit Wacom’s web site for a list of applications that currently support airbrush features. See Product Information. CUSTOMIZING Page 63 Contents Index ADJUSTING To adjust the Intuos2 or Airbrush eraser, select the FEEL tab. To erase with a broad stroke or to click with a light setting. For maximum control while use a firm eraser sett...

Эта инструкция также подходит к моделям:
Устройства ввода - Intuos2 XD-0405-R (2.16 mb)
Устройства ввода - Intuos2 XD-0405-U (2.16 mb)
Устройства ввода - Intuos2 XD-0608-R (2.16 mb)
Устройства ввода - Intuos2 XD-0912-R (2.16 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории