Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
6.
If a firewall is configured between the storage
and group quota management and antivirus policies
system and the network clients, ensure that the
are managed at the Virtual File Server level.
appropriate ports are configured to allow client
1.
From the SSMC main menu, select File
connectivity.
Persona→Virtual File Servers.
7.
Verify that the servers hosting Active Directory,
2.
Click + Create virtual file server or select Create
DNS and NTP services are active and accessible
on the Actions menu.
from the network on which the storage system is
3.
Complete the Create Virtual File Server dialog
being installed.
box.
8.
Verify that the storage system is synchronized to
an authoritative time source. If Active Directory is
IMPORTANT:
Do not use the fs_cpg Common
being used, ensure that the storage system and
Provisioning Group (CPG) when provisioning
the Active Directory Domain Controllers
File Provisioning Groups (FPGs). The fs_cpg is
synchronize their time with the same source. To
the default CPG for the File Persona Software
verify the time and date on the storage system,
Suite and should not be used.
issue the following command:
showdate
9.
To verify the storage system health, issue the
Creating file shares using the SSMC
following command:
File shares provide data access to clients through the
checkhealth
SMB and NFS protocols.
1.
From the SSMC main men, select File
Persona→File Shares.
Configuring the File Persona Software Suite
2.
Click + Create file share or select Create on the
using the SSMC
Actions menu.
3.
Complete the Create File Share dialog box.
The File Persona software can only be configured on
4.
Set the share level access permissions (for
HP 3PAR StoreServ 7000c node pairs (for example,
example, Everyone:fullcontrol for an SMB share
0, 1 or 2, 3). Configuration takes approximately 15
and RW for an NFS export).
minutes to complete.
1.
Launch the HP 3PAR SSMC.
2.
From the SSMC main menu, select File Persona
→Persona Configuration.
Verifying the File Persona configuration
3.
In the Actions field, select Configure File Persona.
4.
Enable File Persona on the appropriate node pairs
Verify the HP 3PAR StoreServ node information:
and set the node IP addresses.
1.
To verify the network configuration information,
5.
Configure network, DNS, and Authentication
issue the shownet command:
settings on the next dialog box.
IP Address Netmask/PrefixLen Nodes Active Speed Duplex
AutoNeg Status
For assistance completing these fields, click the help
10.13.25.220 255.255.255.0 01 1 1000 Full
Yes Active
icon (?) within SSMC.
Default route: 10.13.25.254
NTP server: 10.35.0.2
IMPORTANT:
Do not enable UID/GID static
DNS server: 10.13.23.4
mapping (RFC2307) under Authentication
2.
To verify the date, issue the showdate command:
settings without understanding the functionality
Node the Date
provided by RFC2307. For more information
0 2015-04-07 11:09:33 MDT (America/Denver)
1 2015-04-07 11:09:33 MDT (America/Denver)
about RFC2307, go to https://www.ietf.org/
3.
To verify the license, issue the showlicense
rfc/rfc2307.txt.
command:
License features currently enabled:
File Persona (102400G)
4.
To verify the serial number, issue the showsys
Creating the Virtual File Server using the
command:
SSMC
----------------(MB)----------
A Virtual File Server presents virtual network interfaces
ID Name Model Serial Nodes Master TotalCap
AllocCap FreeCap FailedCap
to allow clients to access file shares. Policies for user
Page 3
...