Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
a.
IP Address: If you know the IP address of the host:
1)
Enter the IP address of the host in the IP Address field.
2)
Enter the access information, as required, to initiate host discovery.
b.
Subnet: If you want to discover hosts for a range of IP addresses:
1)
Enter the starting IP address in the Start at IP Address field.
2)
Enter the limiting IP address in the Stop at IP Address field.
3)
Enter the access information, as required, to initiate host discovery.
NOTE:
For Subnet, the host login details of all the hosts in a subnet must match the login
details specified in the Host Settings screen.
c.
Click Discover Hosts to discover the physical hosts and the associated virtual machines.
13. Under Add Host, select a component group from the Select Component Group list and click
Add.
The host is added under the host node of the selected component group.
14. Click Next.
The Customer Details window is displayed, as shown in Figure 4 (page 8).
Figure 4 Customer Details Window
15. Enter your contact information in the Customer Details window. These details are part of the
processed report.
NOTE:
Ensure that the email address you entered is accurate and the SAN Visibility reports
are sent to this email address only. If the report is sent from E-mail id other than the configured
mail id in SV GUI, then the sender will be notified after successful processing.
Use semicolon (;) between the email addresses to enter multiple email address. For example,
xyz@first.com; abc@second.com; pqr@third.com.
16. Select the appropriate option if you want to receive additional information (such as special
offers, new product information, events, service or support information) from HP.
17. Click Next to view the Advanced Settings window.
8
...