Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Read Me First
hp StorageWorks
Director Power Cord Advisory
The installation kit for the HP StorageWorks Director 2/140 and Director 2/64
includes a total of four (4) power cords:
■
Two (2) PDU (power distribution unit) power cords (Director 2/64 or 2/140)
■
Two (2) 110-volt AC power cords (Director 2/64 only)
You must connect the Director 2/140 or the Director 2/64 to a power source using
the appropriate cords as described in the following sections.
Director 2/140 Power Cord Requirements
The Director 2/140 includes two power supplies (labeled PS0 and PS1 on the rear
of the unit) for redundancy. You must connect each power supply to an
appropriate power source that provides 220-volt AC power. Connect each Director
2/140 power supply to a power distribution unit receptacle using a PDU power
cord.
© Copyright 2002–2004 Hewlet -Packard Development Company, L.P.
AA–RTDMC–TE/958–000279–002
Printed in the U.S.A
July 2004
Product names mentioned herein may be trademarks of their respective companies as reflected by an associated
footnote. The information in this document is subject to change without notice.
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StorageWorks Director 2/64 (78.96 kb)
Устройства обработки данных - HP StorageWorks Director 2/140 (78.96 kb)