Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
User-Level Alternatives to Automatically Adding Users
Note
❏
Share-level security is the alternative recommended for
Windows workgroup-based networks without a domain
controller. Use HD Server Admin’s Security
Microsoft Networking page to change to Share Level, and then
set Permissions appropriately. (See “Set Up Shares” in the
User’s Guide.)
Passthrough Authentication. For user-level security in
networks based on Windows NT Server, you can use the
passthrough authentication feature without automatically adding
the users. Each of your two alternatives for this require additional
configuration, as follows:
•
You can set up and maintain the Users on the HD server with
identical names as on the domain controller and set
Passthrough Authentication, so that the passwords are
authenticated only on the domain controller. You also must
perform all the tasks listed described above for automatically
adding users, except that Automatically add users to user list
should be switched off.
•
You can set up and maintain the Users and the Passwords on
the HD server without association with any other
authentication on the domain.
Additionally, users can change their own passwords once the
administrator has configured them on the HD server. They
access HD Server Admin without the administrator login (and
are limited to the password, Identity, and Support pages), as
follows.
a.
In the web browser, type the server’s IP address in the URL.
b.
On the server’s web page, click the Security tab.
c.
Use the resulting SecurityChange User Password page to
change the password.
d.
As long as the Change User button remains selected and you
do not click on the Web UI or Microsoft Networking button,
you will not be prompted for the Administrator password.
Default User Level Security. If you do not change any defaults
in HD Server Admin as described on page 3 to page 4, then user-
level security is the default and shares are initially configured for
access by the default NT group “Everyone”. This gives full access to
all users who connect. No password is required for access, nor is
Connect As required in NT. This includes the default share “pub”
and new shares you create.
Addendum: HP SureStore HD Server 4000 5
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP J4148A Surestore CD-ROM Exp. Tower (302.34 kb)
Устройства обработки данных - HP J4150A Surestore CD-ROM Server Plus (302.34 kb)
Устройства обработки данных - HP J4152A Surestore CD/DVD-ROM Server (302.34 kb)
Устройства обработки данных - HP Surestore AutoBackup PC25 (302.34 kb)