Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Blade signal
Intercon-
Intercon-
Notes
nect bay
nect bay
label
• Four port cards
• Ports 1 and 3 con-
Mezzanine 2
3, 4
nect to bay 3
• Ports 2 and 4 con-
nect to bay 4
For detailed port mapping information, see the HP BladeSystem enclosure
installation poster or the HP BladeSystem enclosure setup and installation
guide on the HP website
(http://www.hp.com/go/bladesystem/documentation).
Figure 1 Interconnect bay numbering and device mapping (c7000
enclosure)
Connecting to the network
Blade signal
Interconnect bay
Interconnect bay
To connect the HP BladeSystem to a network, each enclosure must be
label
configured with network interconnect devices to manage signals between
the blades and the external network.
NIC 1 (embedded)
1
Two types of interconnect modules are available for HP BladeSystem
c-Class enclosures: Pass-thru modules and switch modules. For more
NIC 2 (embedded)
2
information about interconnect module options, see the HP website
(http://www.hp.com/go/bladesystem/interconnects).
Mezzanine 1
3 and 4
Mezzanine 2
5 and 6
Installing the X1800sb Network Storage
7 and 8
Blade
IMPORTANT:
If your product is factory-integrated, the blades are pre-installed
in the enclosure.
CAUTION:
To prevent improper cooling and thermal damage, do not
operate the blade or the enclosure unless all hard drive and
device bays are populated with either a component or a blank.
Figure 2 Interconnect bay numbering and device mapping (c3000
Installation locations with the optional SB40c Storage
enclosure)
Blade
Blade signal
Intercon-
Intercon-
Notes
The SB40c Storage Blade is an optional storage component that can be
nect bay
nect bay
used in conjunction with the X1800sb Network Storage Blade. If you
label
have purchased optional SB40c Storage Blades, the SB40c blades must
be installed adjacent to X1800sb blades as server blade/storage blade
NICs 1 and 2
pairs. In the figures below, the proper server blade/storage blade pair
1
(embedded)
installation locations are shown as device bays 1 and 2, 3 and 4, and
so on.
Four port cards connect
Mezzanine 1
2
If you have not purchased the optional SB40c Storage Blade, the
to bay 2
X1800sb blades can be installed in any available enclosure device bay.
Page 2
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StoreEasy 1430 8TB SATA LFF Bundle/TVlite (279.43 kb)