Log in to the system as a local administrator (not a domain user) and open the wizard.
•
If the HP 3830 Gateway Storage Blade is installed into an existing c7000 or c3000 enclosure,
the image of the server blade that is displayed in the Onboard Administrator GUI may incorrectly
reflect the older G7 version of the server blade.
The incorrect image or firmware in Onboard Administrator does not affect management or use
of the server blade. The issue is resolved in the latest firmware, version 3.71.
Initial Configuration Tasks
•
On some storage system models the HP Lights-Out Online Configuration Utility displays the error
message Feature not supported when navigating to Settings > Configure iLO. The most
commonly-changed settings such as enabling DHCP, changing the iLO DNS name, adding iLO
users, or changing iLO user passwords, can still be configured using the HP Lights-Out Online
Configuration Utility's User and Network menu items.
The settings under the Settings menu item must be configured by using the iLO ROM-Based Setup
Utility (RBSU). Press F8 when prompted at the console during system POST to open the RBSU.
Global settings that are not supported in the online utility can be configured here.
•
The Initial Configuration Task window displays the following message:
To complete configuration of the first node, log off and then log on
again using a domain user account with local administrative permissions.
This message appears after joining an HP StoreEasy 1000 system to a domain, and then logging
on to the system again as the local administrator. This also occurs when deploying an HP StoreEasy
3000 Storage as a standalone system, rather than a two-node cluster.
Perform the following steps:
1.
Add a domain user as a member of the local Administrators group on the HP StoreEasy 3000
Storage system.
2.
Log off and log on again as the domain user.
The Initial Configuration Tasks window will open automatically.
3.
Complete the configuration tasks.
•
The default setting for Windows Update is to "Install Updates Automatically". Although this is the
default setting, HP recommends that this be changed to avoid unexpected reboots and system
unavailability. For more information, see the online help, which can be launched from the Initial
Configuration Tasks Window.
If the HP StoreEasy 3000 Storage is deployed as a standalone system, use the ICT task to change
the setting to either:
◦
Download updates but let me choose whether to install them.
◦
Check for updates but let me choose whether to download and install them.
If the HP StoreEasy 3000 Storage is deployed as a cluster, perform the following steps:
1.
Use the ICT task to configure Cluster Aware Updating.
2.
Launch Windows Update from the control panel and change the setting to either:
◦
Download updates but let me choose whether to install them.
◦
Check for updates but let me choose whether to download and install them.
•
While deploying HP StoreEasy 3000 Storage as a two node cluster, after selecting a language
and accepting the EULA, you may see a message box with the error:
Found more than one node. Cannot establish communication with the second
node.
4
Workarounds

---

...

Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StoreEasy 3830 Gateway Storage/S-Buy (143.74 kb)
Устройства обработки данных - HP StoreEasy 3840 Gateway Storage (143.74 kb)
Устройства обработки данных - HP StoreEasy 3840 Gateway Storage/S-Buy (143.74 kb)
Устройства обработки данных - HP X3400 G2 Network Storage Gateway (143.74 kb)