Оценок - , средний балл:
(
)
)
Производитель: HP
Размер: 123.54 kb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
К этому устройству также есть другие инструкции:
Фрагмент инструкции
HP StorageWorks X1000 G2
2.
If connecting to the storage system using the direct attach method,
connect the following cables to the back panel of the storage system
Network Storage System Quick
Supported storage systems
in the following sequence: keyboard, mouse, network cable, monitor
Power on and complete the configuration
cable, and power cable.
Start Guide
1.
Power on the system by pushing the power button on the front panel.
These installation instructions apply to the following HP StorageWorks
If using iLO , click Momentary Press on the Power Management
Network Storage System models:
NOTE:
page to power on the server, then click Launch on the Status
• HP StorageWorks X1400 G2 Network Storage System
The keyboard, mouse, and monitor are not provided
Summary page to open the iLO Integrated Remote Console and
• HP StorageWorks X1500 G2 Network Storage System
with the storage system.
complete the installation process.
• HP StorageWorks X1600 G2 Network Storage System
The storage system starts and displays an HP Network Storage
• HP StorageWorks X1800 G2 Network Storage System
System installation screen. The storage system installation process
3.
If connecting to the storage system using the remote management
takes approximately 10–15 minutes.
method, connect a network cable to a data port, a network cable
to the iLO port, and power cable.
Supporting documentation
NOTE:
Your storage system comes pre-installed with the
The following documentation provides additional information about using
Microsoft Windows Storage Server 2008 R2 operating
your HP Network Storage System. To obtain this documentation, Go to
Access the storage system
system. There is no operating system installation
http://www.hp.com/go/nas, select your product family, select your
This document covers the HP StorageWorks X1000
required.
product model, click HP Support & Drivers, and then click Manuals.
Use either the direct connect or remote management method to connect
Generation 2 (G2) Network Storage System models
to the storage system.
• HP StorageWorks X1000 G2 Network Storage System User Guide
X1400, X1500, X1600, and X1800.
• HP StorageWorks Automated Storage Manager User Guide
When the storage system installation process nears completion, the
• HP Rack Rail Kit Installation Instructions
IMPORTANT:
Windows Storage Server 2008 R2 desktop displays the following
• HP ProLiant Servers Troubleshooting Guide
Only the direct attach and remote management access methods
message: The user's password must be changed before logging on
can be used to install the storage system. After the storage system
the first time. Log on to the storage system by establishing an
• HP Integrated Lights-Out 2 User Guide
installation process is complete and the system's IP address has
Administrator password:
• HP ProLiant Integrated Lights-Out 3 User Guide
been assigned, you can then additionally use the remote browser
2.
Click OK.
and remote desktop methods to access the storage system.
3.
Type an Administrator password in the New password box.
IMPORTANT:
4.
Re-type the Administrator password in the Confirm password box.
Included with your storage system is the HP StorageWorks
• Direct attach — Connect a monitor, keyboard, and mouse directly to
Storage System Recovery DVD. This DVD is used to restore the
the storage system. This access method is mandatory if your network
5.
Click the blue arrow next to the Confirm password box.
system to factory defaults. Keep this DVD in a safe place.
does not have a Dynamic Host Configuration Protocol (DHCP) server.
6.
Click OK.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
• Remote management — Access the storage system using the Integrated
Lights-Out remote management method:
After the Administrator password has been set, the storage system
First edition: November 2010
1.
Ensure that a network cable is connected to the iLO port located
completes the installation process.
on the back of the storage system.
7.
When prompted, press CTRL+ALT+DELETE to log on to the system.
The information in this document is subject to change without notice.
Install the storage system hardware
2.
Locate the iLO Network Settings tag attached to the storage
If using iLO, on the iLO Integrated Remote Console tab, click the
Microsoft, Windows, Windows XP, and Windows NT are U.S.
1.
Install the rail kit by following the HP Rack Rail Kit Installation
system and record the default user name, password, and DNS
button labeled CAD and then click the Ctrl-Alt-Del menu item.
registered trademarks of Microsoft Corporation.
Instructions.
name.
The HP StorageWorks Initial Configuration Tasks window launches
www.hp.com
For more information, go to http://www.hp.com/go/nas, select
3.
From a remote computer, open a standard Web browser and
automatically on logon. Use this tool to perform setup tasks such as setting
your product family, select your product model, click HP Support &
enter the iLO management hostname of the storage system.
the time zone, network configuration, changing the computer name, and
Drivers, and then click Manuals.
joining a domain. When the HP StorageWorks Initial Configuration Tasks
window is closed, HP Server Manager is launched automatically. Use
NOTE:
HP Server Manager for further customizing of the storage system, such
NOTE:
By default, iLO obtains the management IP address
as adding roles and features, and share and storage management.
If you ordered the HP Tower to Rack Conversion Tray
and subnet mask from your network’s DHCP server.
After the storage system installation process is complete, you can use the
Universal Kit for the purpose of installing the X1500
The hostname found on the iLO tag is automatically
remote browser and remote desktop methods to access and configure
Network Storage System tower model in a rack, use the
registered with your network’s DNS server.
the storage system. See the HP StorageWorks X1000 G2 Network
provided tower-to-rack conversion kit installation
Storage System User Guide for more information about using these access
instructions to install the tower hardware into the rack.
methods.
4.
Using the default user information provided on the iLO Network
Settings tag, log on to the storage system.
For detailed instructions on using each of these access methods, see the
Manage your storage
HP StorageWorks X1000 G2 Network Storage System User Guide,HP
Integrated Lights-Out 2 User Guide, or HP ProLiant Integrated Lights-Out
After installing and setting up your HP StorageWorks Network Storage
3 User Guide.
System, you can begin managing your storage using the HP Automated
Storage Manager (ASM). HP ASM comes preinstalled on all HP X1000
G2 Network Storage Systems.
*5697-0600*
HP ASM provides storage-allocation wizards that walk you through the
process of allocating and configuring storage on your HP Network
Storage System to host application data and shared folders. The
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StorageWorks X3800 Network Storage Gateway (123.54 kb)
Устройства обработки данных - HP StorageWorks X1400 Network Storage System (123.54 kb)
Устройства обработки данных - HP StorageWorks X1500 Network Storage System (123.54 kb)
Устройства обработки данных - HP StorageWorks X1600 Network Storage System (123.54 kb)