3.
From a remote computer, open a standard Web browser and
enter the iLO 2 management hostname of the storage system.
Install the storage system hardware
1.
Install the rail kit by following the HP Rack Rail Kit Installation
NOTE:
Instructions, part number 464164-001.
By default, iLO 2 obtains the management IP
For more information, go to http://www.hp.com/go/nas, select
address and subnet mask from your network’s DHCP
your product family, select your product model, click HP Support &
server. The hostname found on the iLO 2 tag is
Drivers, and then click Manuals.
automatically registered with your network’s DNS
server.
NOTE:
If you ordered the HP Tower to Rack Conversion Tray
4.
Using the default user information provided on the iLO 2
Universal Kit (part number 417705-B21) for the
Network Settings tag, log on to the storage system.
purpose of installing the X1500 Network Storage
System tower model in a rack, use the provided
For detailed instructions on using each of these access methods, see the
tower-to-rack conversion kit installation instructions to
HP X1000 and X3000 Network Storage System User Guide or the HP
install the tower hardware into the rack.
Integrated Lights–Out 2 User Guide.
2.
If connecting to the storage system using the direct attach method,
Power on and complete the configuration
connect the following cables to the back panel of the storage system
in the following sequence: keyboard, mouse, network cable, monitor
1.
Power on the system by pushing the power button on the front panel
cable, and power cable.
(remove the bezel if needed). If using iLO 2, click Momentary Press
on the Power Management page to power on the server, then click
Launch on the Status Summary page to open the iLO 2 Integrated
NOTE:
Remote Console and complete the installation process.
The keyboard, mouse, and monitor are not provided
The storage system starts and displays an HP Network Storage
with the storage system.
System installation screen. The storage system installation process
takes approximately 10–15 minutes.
3.
If connecting to the storage system using the remote management
method, connect a network cable to a data port, a network cable
NOTE:
to the iLO 2 port, and power cable.
Your storage system comes pre-installed with the
Microsoft Windows Storage Server 2008 operating
system. There is no operating system installation
Access the storage system
required.
Use either the direct connect or remote management method to connect
to the storage system.
When the storage system installation process nears completion, the
Windows Storage Server 2008 desktop displays the following
message: The user's password must be changed before logging on
IMPORTANT:
the first time. Log on to the storage system by establishing an
Only the direct attach and remote management access methods
Administrator password:
can be used to install the storage system. After the storage
2.
Click OK.
system installation process is complete and the system's IP
address has been assigned, you can then additionally use the
3.
Type an Administrator password in the New password box.
remote browser and remote desktop methods to access the
storage system.
4.
Re-type the Administrator password in the Confirm password box.
5.
Click the blue arrow next to the Confirm password box.
6.
Click OK.
• Direct attach — Connect a monitor, keyboard, and mouse directly
to the storage system. This access method is mandatory if your net-
After the Administrator password has been set, the storage system
work does not have a Dynamic Host Configuration Protocol (DHCP)
completes the installation process.
server.
7.
When prompted, press CTRL+ALT+DELETE to log on to the system.
• Remote management — Access the storage system using the Integ-
If using iLO 2, on the iLO 2 Integrated Remote Console tab, click
rated Lights-Out 2 remote management method:
the button labeled CAD and then click the Ctrl-Alt-Del menu item.
1.
Ensure that a network cable is connected to the iLO 2 port
located on the back of the storage system.
When logging in for the first time on X1000 systems, the HP Initial
2.
Locate the iLO 2 Network Settings tag attached to the storage
Configuration Wizard opens. This wizard provides an optional method
system and record the default user name, password, and DNS
for completing the minimum required setup of the storage system. After
name.
completing the wizard steps, the system will be ready for file sharing on
your network with the first shared folder created and accessible by client
computers. To dismiss the Initial Configuration Wizard and instead use
Page 2

---

...

Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StorageWorks X3800 Network Storage Gateway (125.22 kb)
Устройства обработки данных - HP StorageWorks X1400 Network Storage System (125.22 kb)
Устройства обработки данных - HP StorageWorks X1500 Network Storage System (125.22 kb)
Устройства обработки данных - HP StorageWorks X1600 Network Storage System (125.22 kb)