Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель HP XP P9500 Disk Array

Производитель: HP
Размер: 2.12 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Table 13 List of messages (message ID YKM7x) (continued)
Message ID
Message text
Explanation and recommended actions
YKM752E ISPF
DEVN must be 4 hexadecimal
The device number must be a four-digit hexadecimal number (0-9,
characters (0-9, A-F, a-f).
A-F, a-f).
YKM753E ISPF
APID must be 4 hexadecimal
The APID must be a four-digit hexadecimal number (0-9, A-F, a-f).
characters (0-9, A-F, a-f).
YKM754E ISPF
Route List ID must be a combination The route list ID must be a combination of one or more qualifiers.
of one or more qualifiers. Each
Each qualifier must be from 1 to 8 alphanumeric characters (0-9,
qualifier must be 1-8 alphanumeric A-Z, a-z), and must begin with an alphabetic character (A-Z, a-z).
characters (0-9, A-Z, a-z) with the
The length of the route list ID must be from 1 to 8 characters.
first character being an alphabetic
character (A-Z, a-z). The length of
Route List ID must be 1-8.
YKM755E ISPF
Configuration File Prefix must be a The prefix of the configuration file name must be a combination of
combination of one or more
one or more qualifiers. Each qualifier must be from 1 to 8
qualifiers. Each qualifier must be
alphanumeric characters (0-9, A-Z, a-z), and must begin with an
1-8 alphanumeric characters (0-9,
alphabetic character (A-Z, a-z). The length of the configuration file
A-Z, a-z) with the first character
name prefix must be from 1 to 16 characters.
being an alphabetic character (A-Z,
a-z). The length of Configuration
File Prefix must be 1-16.
YKM756E ISPF
Copy Group ID must be a
The copy group ID must be a combination of one or more qualifiers.
combination of one or more
Each qualifier must be from 1 to 8 alphanumeric characters (0-9,
qualifiers. Each qualifier must be
A-Z, a-z), and must begin with an alphabetic character (A-Z, a-z).
1-8 alphanumeric characters (0-9,
The length of the copy group ID must be from 1 to 40 characters.
A-Z, a-z) with the first character
being an alphabetic character (A-Z,
a-z). The length of Copy Group ID
must be 1-40.
YKM757E ISPF
The 4-digit year (YYYY) or 2-digit
The value for the year (YYYY), month (MM), or day (DD) was not
month (MM) or 2-digit day (DD)
numeric. Specify a value for the year, month, and day in the range
was not numeric. Valid year values 1970 to 2042, 01 to 12, and 01 to 31, respectively.
are 1970-2042, valid month
values are 01-12, and valid day
values are 01-31.
YKM758E ISPF
The hour, minute, or second value
The value for the hour, minute, or second was not numeric. Specify
is not numeric. Valid values are
a value for the hour, minute, and second in the range 00 to 23, 00
00-23 for hour, 00-59 for minute,
to 59, and 00 to 59, respectively.
and 00-59 for second.
YKM759E ISPF
Enter numeric characters (0-9).
Please enter a numeric value (0-9).
YKM760E ISPF
Preset Mode cannot be used when You cannot set the Preset Mode without specifying a consistency
C/T ID is not specified.
group ID.
YKM761E ISPF
Check Device Num, Volser, or Non Check the value specified in Device Num, Volser, or Non Gen'ed.
Gen'ed.
YKM762E ISPF
You cannot perform an NG scan
You cannot perform an NG Scan, because the specified device
because the specified DADID
address domain ID is the same as the local device address domain
matches a local or remote DADID. ID or remote device address domain ID. For details about the NG
Scan, see the Hitachi Business Continuity Manager User Guide.
YKM763E ISPF
You cannot perform an NG scan
You cannot perform an NG Scan, because a Local Scan has not been
because no local scan has been
performed for the specified storage system. For details about the NG
performed for the specified storage Scan, see the Hitachi Business Continuity Manager User Guide.
system.
YKM764E ISPF
Select one of the displayed lines.
Select one of the displayed lines.
YKM765I ISPF
A description for the specified error A description for the specified error code was not found.
code was not found.
List of Messages
67


...

Эта инструкция также подходит к моделям:
Устройства обработки данных - HP XP7 Storage System (2.12 mb)
Устройства обработки данных - HP XP1024 Disk Array (2.12 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории