WARNING: To reduce the risk of electric shock or damage to
the equipment:
• Do not disable the power cord grounding plug. The
grounding plug is an important safety feature.
• Plug the power cord into a grounded (earthed) electrical
outlet that is easily accessible at al times.
• Unplug the power cord from the power supply to
disconnect power to the equipment.
• Do not route the power cord where it can be walked on or
pinched by items placed against it. Pay particular attention
to the plug, electrical outlet, and the point where the cord
extends from the storage system.

To connect AC power cords:
1. Connect the power cords to the power supplies.
2. Connect the power cords to the AC power source.

5 Powering up
Observe the fol owing guidelines before powering up the D6000:
•
Always install all components of the D6000.
•
Instal hard drives in the D6000 so the connected host control ers can identify
and configure them at power up.
•
Always power up the D6000 first, and then the server.
To power up the D6000:
1. Complete server hardware installation and cabling. For more information, see
the server documentation.
2. Connect the SAS cables and power cords to the D6000.
3. Press and hold the Power On/Standby but on.
Wait and observe the system power LED and system fans. When the D6000
powers up, the system power LED il uminates solid green and the system fans
spin to a high speed, and then spin down to a low speed.
4. Power up the servers. For more information, see the server documentation.

For definitions of the acronyms used in this document, refer to "Acronyms and
abbreviations" on the Documentation CD.

Legal notices
© Copyright 2012 Hewlet -Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP
products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Documentation feedback
HP is commit ed to providing documentation that meets your needs. To help us
improve the documentation, send any errors, suggestions, or comments to
Documentation Feedback (mailto:docsfeedback@hp.com). Include the document title
and part number, version number, or the URL when submit ing your feedback.

---

...

Эта инструкция также подходит к моделям:
Устройства обработки данных - HP D6000 w/35 2TB 6G SAS 7.2K LFF Dual port MDL HDD 70TB Bundle (558.07 kb)
Устройства обработки данных - HP D6000 w/35 3TB 6G SAS 7.2K LFF Dual port MDL HDD 105TB Bundle (558.07 kb)
Устройства обработки данных - HP D6000 w/35 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 140TB Bundle (558.07 kb)
Устройства обработки данных - HP D6000 w/70 2TB 6G SAS 7.2K LFF Dual port MDL HDD 140TB Bundle (558.07 kb)