Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
HP StorageWorks
About this document
Small Form Factor Disk Enclosure
For the latest documentation, go to http://www.hp.com/support/
manuals, and select your product.
Backplane replacement
The information contained herein is subject to change without notice.
instructions
The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
WARRANTY STATEMENT: To obtain a copy of the warranty for this
product, see the warranty information website: http://www.hp.com/
go/storagewarranty
This document details procedures for replacing a failed
Before you begin
backplane in an HP StorageWorks Small Form Factor
(SFF) Disk Enclosure.
Observe the following precautions when replacing the backplane.
CAUTION:
Parts can be damaged by electrostatic discharge. Use proper
anti-static protection. Refer to the documentation that shipped
with your system for additional information.
The backplane is located inside the chassis of the disk enclosure.
NOTE:
© Copyright 2009 Hewlett-Packard Development Company, L.P.
Information about this component is also available on the hood
label.
Fourth edition: February 2010
The information in this document is subject to change without notice.
Printed in the US
CAUTION:
www.hp.com
• These procedures require that all disk drives be removed from
the enclosure and returned to their original drive bays.
• HP recommends removing disk drives prior to removing the
enclosure from the rack. If this is not possible, two people are
required to remove the enclosure from the rack to prevent in-
jury.
Verifying component failure
Use the following methods to verify component failure:
• Analyze any failure messages received. HP fault monitoring software
provides a recommended action.
• View Onboard Administrator system and device status displays for
Critical, Major, Minor, and Warning icons. For more information,
see the Onboard Administrator user guide.
• Check the enclosure LEDs.
*504220-004*
• Green = Normal operation
• Amber = Fault condition
Page 1
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP D2600 Disk Enclosure/S-Buy (552.49 kb)
Устройства обработки данных - HP D2600 w/6 2TB 6G SAS 7.2K LFF DP MDL HDD 12TB Bundle (552.49 kb)
Устройства обработки данных - HP D2600 w/6 3TB 6G SAS 7.2K LFF Dual port MDL HDD 18TB Bundle (552.49 kb)
Устройства обработки данных - HP D2600 w/6 450GB 6G SAS 15K LFF Dual Port Enterprise HDD 2.7TB Bundle (552.49 kb)