Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
or >+ to select the day of the week. •• Press –. or >+ to select “DAILY”. 4 Press NxPLAY/STOP. The hour digits will flash. 5 Set the alarm time. 1 Press –. or >+ to select the hour digits and press NxPLAY/STOP. The minute digits will flash. 2 Press –. or >+ to select the minute digits and press NxPLAY/STOP. “ALARM On” and “,” will be displayed to indicate that the setting has been completed. 6 Press MENU to exit the menu mode. Advanced Operations “,” is displayed when the number of the message with alarm setting is selected. At the set time, the alarm will sound for about 10 seconds and the selected message will be played back. During playback, “ALARM” will flash in the display window. Playback will stop at the end of the message. Continued 23 Playing Back a Message at a Desired Time with an Alarm (continued) Playing Back a Message at a Desired Time with an Alarm (continued) Press STOP while the alarm sound is heard. You can stop even when the HOLD function is activated. Notes • You cannot set the alarm if you have not set the clock or there is no message in the selected file (the unit will not enter the alarm setting mode when you press MENU in Step 2 on page 21). • If you try to set the alarm to play back a message at a previously set time on another message, “PRE SET” will be displayed, preventing new settings. • If the alarm time comes while another message is being played back with an alarm, the playback stops and the new message will be played back. • If the alarm time comes during recording, alarm will sound for 10 seconds after the recording is finished and playback begins. “,” will flash when the alarm time comes. • If more than one alarm time comes during recording, only the first message will be played back. • If the alarm time comes when the unit is in the menu mode, alarm will sound and the menu mode will be cancelled. • If you erase the message you set the alarm to play back, the alarm setting will be cancelled. • You can adjust the playback volume with the VOL control. • If the alarm time comes during erasing, alarm will sound for 10 seconds after the erasing is finished and playback begins. • Alarm setting will not be cancelled when the alarm playback finishes. To cancel alarm setting, see page 25. To cancel the alarm setting or change the alarm time To cancel the alarm setting or change the alarm time “ALARM On” will be displayed. 2 Press NxPLAY/STOP to flash “On”. 3 To cancel the alarm setting: Press –. or >+ to flash “OFF” and press NxPLAY/STOP. To change the alarm date and time: Press NxPLAY/STOP. When the alarm date is displayed, follow the Steps 3 to 5 on pages 22 and 23 to change the alarm date and time. 4 Press MENU to exit the menu mode. Preventing Accidental Operation — HOLD function HOLD switch Slide the HOLD switch in the direction of the arrow. “HOLD” will flash three times, indicating that all the functions of the buttons are locked, except for STOP to stop an alarm. To cancel the HOLD fun...