Оценок - , средний балл:
(
)
)
Производитель: Coleman
Размер: 150.38 kb
Название файла: 2000001589.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
• For best results in windy conditions, position narrow end of tent into the wind. • Enlist the help of at least one other person to assist you when it is time to assemble the tent. Pole Descriptions Pole Pole Pole Description Qty. Dia. Repair Kit Replacement Kit Main Pole, black 2 11mm 501000539 501000549 Main Pole, grey 1 11mm 501000539 501000549 Rainfly Pole, black, long 1 11mm 501000539 501000549 Awning Pole, black, short 1 6.9mm 501000542 501000552 To Set Up Tent 1. Unfold tent and spread out on a clean, level surface with the door facing the desired direction. (Fig. 1) 2. Assemble all poles by interlocking the shock-corded, sections together. 3. Insert black Main Poles through the black trimmed sleeves on top of tent forming an X”. 4. Insert grey Main Pole through grey trimmed sleeve, in front of tent. Make sure grey Main Poles overlap the black Main Poles. (Fig. 1) STITCH LINEFig. 1 Door Grey, Shock-corded Main Pole Black, Shock-corded Main Poles Sleeves with Black Trim Sleeve with Grey Trim Front of Tent 5. Insert end of each black Main Pole into pins located in the corners of the tent. (Fig. 2 & 2A) 6. Go to opposite end of each black Main Pole and gradually apply pressure to each forming arches. Insert the pin into each pole end at the corners of tent. (Fig. 2 & 2A) 7. Insert end of the grey Main Pole into pin located on the sides of the tent. (Fig. 2 & 2B) 8. Go to opposite end of the grey Main Pole and gradually apply pressure to form an arch. Insert the pin into pole end at the side of tent. (Fig. 2 & 2B) Fig. 2 Door 2A 2B Front of Tent 9. Attach frame clips along edges of tent to the black & grey Main Poles. (Fig. 3) Fig. 3 10. Stretch tent until taut, then secure metal loops located on both sides and four corners of tent with stakes. (Fig. 4) Fig. 4 To Attach Rainfly 1. Drape Rainfly over tent with dark blue vestibule flaps located at the front of the tent. (Fig 5). NOTE: Hook and loop fasteners, located on seams of underside of Rainfly, should be centered over black & grey Main Poles. 2. Insert the long, black, Rainfly Pole with through sleeve in underside of Rainfly above front door of tent. (Fig. 5) Fig. 5 Sleeve with Grey Trim Black, Shock-corded Rainfly Pole Rainfly Front of Tent Door Vestibule Flaps 3.Insert short, black, thin Awning Pole through sleeve in underside of Rainfly above window at back of tent. (Fig. 6) 4. Insert metal tip into grommet on tent seam at back of tent (Fig. 7). Go to opposite end of Awning Pole and gradually apply pressure to pole forming an arch; then insert metal tip into grommet. Fig. 6 Awning Pole Rainfly Sleeve Back of Tent Awning Pole Grommet Fig. 7 5. Insert end of each black Rainfly Pole into pin on either side of front door. (Fig. 8) 6. Go to opposite end of Rainfly Pole and gradually apply pressure to form an arch. Insert the pin into pole end at other side of the door. (Fig. 8) 7. Locate all hook & loop fasteners on under side of Rainfly and wrap around all Main Poles, Awning & Rainfly Pole to secure. (Fig. 9) NOTE: Make sure longer hook & loop fastener on Rainfly is secured around grey and black Main Poles where they cross. (Fig. 10) (continued on other side) Fig. 8 Fig. 9 Fig. 10 To Attach Rainfly (continued) 8. Stretch elastic straps and hook clip on each to the metal loops at the front and back corners of the tent. (Fig. 11 & 11A) 9. Extend out vestibule flaps and secure with metal stakes through the loops in the web straps. (Fig. 11 & 11B) 10. Stretch guylines until taut, then secure with stakes. (Fig. 11 & 11C) 11B Fig. 11 11C 11A STITCH LINE Electrical Cord Access 1. Unzip the access panel in the lower left corner of tent and bring in an electrical cord. NOTE: Use only UL approved cords rated for outdoor usage. (Fig. 12) Fig. 12 Cooler Access The smaller zippered opening at the side of tent is designed for added ventilation and easy access to your beverage cooler. 1. To use as a vent, unzip flap to expose screen. 2. To use as a cooler access, unzip other flap to Fig. 13 make an avenue to bring beverages into tent. (Fig. 13) To Store 1. All poles and stakes must be placed in the storage bag to prevent damage to the fabric items placed in the carry case. 2. Make sure tent is clean and dry before placing in carry case. 3. Remove rainfly, spread out on floor of tent, then unzip door & vents before taking tent down for storage. 4. Neatly fold tent to width of pole storage bag, place on tent, roll tightly, and place in carry case. 5. Store in a clean, dry area. Things You Should Know: • Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside of your tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside the tent. It is NOT LEAKAGE through the tent fabric. It can be minimized by removing wet clothing from your tent and by providing good ventilation through the tent. • Tree limbs, tree sap, bird droppings, or moisture steadily dripping off tree limbs can cause dam...