Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
KEYS FITNESS EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS WARRANTY. NEITHER KEYS FITNESS NOR ANY OF ITS AFFILIATES SHALL BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OF THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU. This Warranty gives you express warranty applicable to Keys Fitness branded products. Keys Fitness neither assumes nor authorizes anyone to assume for it any other express warranty. Before returning a product you must call Keys Fitness at 1-888-340-0482 to obtain a Return Authorization Number. No returns will be accepted without the Return Authorization Number. Original purchaser must pre-pay all freight charges on warranty claims. Keys Fitness will not accept Freight Collect shipments or return shipments on freight collect basis. You must fill outWarranty Registration Card completely, and return it to KEYS FITNESS within 30 days of purchase for this warranty to be valid. Be sure to include a copy of your original receipt. PLEASE FILL OUT THE FOLLOWING AND RETURN TO: KEYS FITNESS PRODUCTS, L.P. P.O. BOX 551239 DALLAS, TX 75355-1239 NAME_ ADDRESS _ CITY_STATE_ZIP PHONE(H)_(W)_ ITEM PURCHASED_STORE NAME_ PRICE WARRANTY CARD PURCHASE DATE 1 IMPORTANT SAFETY INFORMATION WARNING: Before beginning this or any exercise program consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions in this manual before using this product. KEYS FITNESS assumes no responsibility for personal injury or property damage sustained by or through the use of this product. Never release the press arm. butterfly, leg lever, bars or straps while weights are raised. The weights will fall causing injury to yourself or the weight system. Check cables to ensure they remain on the pulleys as you use the weight system. If you feel pain or dizziness at any time while exercising, stop immediately and begin cooling down. 1 Inspect and tighten all parts each time you use the weight training system. Replace any worn parts by contacting your local dealer or KEYS FITNESS. 2 Keep your hands and other parts of your body away from moving parts other than designed handles. 3 Keep small children away from the weight system at all times. 4 When adjusting seat height make sure the pin of the lock knob is in one of the holes in the seat post. If the pin is not in one of the seat post holes, the seat may slip during use causing serious injury. * ONLY TIGHTEN BOLT CONNECTIONS "FINGER TIGHT" UNTIL THE WEIGHT SYSTEM IS COMPLETELY ASSEMBLED UNLESS OTHER WISE TOLD TO DO SO IN INSTRUCTIONS. * Assembly requires two persons. * The following tools (not included) are required for assembly the Strength Trainer 250: two 8" adjustable wrenches, a 9/16" socket wrench, a 1/2" socket wrench, a rubber mallet, and a standard screwdriver. * Read each step in alphabetical order completely before proceeding. Do not skip ahead, it may result in mis-assembly which may damage the weight system. * Place all parts of the ST 250 in a cleared area and remove the paccking material. Do not dispose of the Packing materials until assembly is completely. ROLT AND WASHER GUIDE 3/8” n 1 LT —1 5/8” J i” 2” 2 1/2” 3” 3 1/2” 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 1 1 1 1 1 1 1 1 1 2 2 2 2 1 2 2 3 1 1 4 12 3 1 1 1 0 PART NAME Main Base Frame Rear Stabilizer Rear Upright Foot Plate Front Upright Flat Plate Top Frame Seat Support Seat Brace Leg Extension Tube Press Arm Rear Bar Press Bar Bracket of Press Arm Chroming Tube Flat Plate Adj. Plate Seat / Back Cushion Pad Tube Lat Bar Curl Bar Metal Spacer Metal Spacer Metal Spacer Selecting Rod Pivot Bolt Cable Resistance Plate Pad Tube Hex Head, Bolt Hex Head, Bolt Hex Head, Bolt Hex Head, Bolt Hex Head, Bolt t3.0 x 50 x 130 t3.0 x 50 x 200 t3.0 x 235 x 50 t12 x 395x250 25.4 xt1.5x 440 25.4 xt2.0x 1150 25.4 xt2.0x 400 15.8x 10x20 12.7 x t1.5 x 12 12.7 xt1.5x 9.5 25.4x475 1/2" x 19.1 x 210 t3.0 x 20 x 84 3/8" x 2 5/8 3/8" x 2 3/4" 3/8" x 3" 3/8" x 3 1/2" 3/8" x 4" 3 PARTS LIST DIAGRAM# PART NAME Q'TY 34 Hex Head Bolt 3/8" x 7 3/8" 2 35 Hex Head Bolt 3/8" x 2 3/8" 2 36 Hex Head Bolt 3/8" x 1 7/8" 4 37 Hex Head Bolt 3/8" x 3 3/4" 1 38 Washer 3/8" x 23 x t 2.0 78 39 Washer 1/2" x 28 x t 2.0 2 40 Nylon Nut 3/8" 37 41 Hex Head Bolt 5/16" x 2 1/2" 2 42 Screw Bolt 1/4" x 5/8" 2 43 Nylon Nut 1/2" 2 44 Nylon Nut 5/16" 2 45 Washer 5/16" x 19 xt 2.0 4 46 Eyeball Pin 3/8" x 52 2 47 "L" Pin 3/8" x 110 1 48 Locking Knob 3/8" x 1 5/8" 1 49 Spring Knob M20 x 1.5 x 10 1 50 Brass Bushing 19.3x25.4x31 x 20 2 51 ...