Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Press ENTER to select. Console will reset to start-up screen. • The product selection and model configuration is now complete. CONSOLE ASSEMBLY GUIDE X6000 ELLIPTICAL TRAINER 500 South CP Avenue • P.O. Box 280 • Lake Mills, WI 53551 toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373 ©2008 Vision Fitness. All Rights Reserved. May be covered by one or more patents or patents pending: US 5540637, US 5573480, US 5813949, US 5813949, US 5924962, US 5938567, US 6135927, US 6149551, US 7316633, TW 364373, TW 371899, CN 99808486.7 9.08 AG18.19PRD REV9 TOOLS & PARTS INCLUDED Screwdriver 6mm L-Shaped Wrench 5mm L-Shaped Wrench 13mm/15mm Wrench ORANGE BAG PINK BAG 8x38x2T Washer Quantity: 2 20x29x1.5T Wavy Washer Quantity: 2 M8 Nut Quantity: 4 M4x15L PanHead Bolt Quantity: 2 8x15x2T Washer Quantity: 3 M8x75L Bolt Quantity: 2 25x34x2T Wavy Washer Quantity: 2 8x25x1.5T Washer Quantity: 2 M8x30L Bolt Quantity: 2 BLUE BAG M5x10L Bolt Quantity: 2 8x38x2T Washer Quantity: 2 5x10x1T Washer Quantity: 2 Rubber Nut Cap Quantity: 2 5x10x1T Washer Quantity: 4 Link Arm Sleeve Quantity: 2 25x34x2T Wavy Washer Quantity: 2 M8x20L Bolt Quantity: 2 M8x25L Bolt Quantity: 28x14x1.5T Washer Quantity: 2 5mm T-Shaped Wrench YELLOW BAG M8x25L Bolt Quantity: 4 M5x12-L Bolt Quantity: 4 8x20x2T Washer Quantity: 2 8x15x2T Washer Quantity: 4 8x17x1T Arc Washer Quantity: 4M8x15L Bolt Quantity: 2 M8x60L Socket Head Bolt Quantity: 3 8x17x1T Arc Washer Quantity: 4 M8x13L Bolt Quantity: 6 M8x20L Bolt Quantity: 2 GREEN BAG TOOLS & PARTS INCLUDED Screwdriver 6mm L-Shaped Wrench 5mm L-Shaped Wrench 13mm/15mm Wrench ORANGE BAG PINK BAG 8x38x2T Washer Quantity: 2 20x29x1.5T Wavy Washer Quantity: 2 M8 Nut Quantity: 4 M4x15L PanHead Bolt Quantity: 2 8x15x2T Washer Quantity: 3 M8x75L Bolt Quantity: 2 25x34x2T Wavy Washer Quantity: 2 8x25x1.5T Washer Quantity: 2 M8x30L Bolt Quantity: 2 BLUE BAG M5x10L Bolt Quantity: 2 8x38x2T Washer Quantity: 2 5x10x1T Washer Quantity: 2 Rubber Nut Cap Quantity: 2 5x10x1T Washer Quantity: 4 Link Arm Sleeve Quantity: 2 25x34x2T Wavy Washer Quantity: 2 M8x20L Bolt Quantity: 2 M8x25L Bolt Quantity: 28x14x1.5T Washer Quantity: 2 5mm T-Shaped Wrench YELLOW BAG M8x25L Bolt Quantity: 4 M5x12-L Bolt Quantity: 4 8x20x2T Washer Quantity: 2 8x15x2T Washer Quantity: 4 8x17x1T Arc Washer Quantity: 4M8x15L Bolt Quantity: 2 M8x60L Socket Head Bolt Quantity: 3 8x17x1T Arc Washer Quantity: 4 M8x13L Bolt Quantity: 6 M8x20L Bolt Quantity: 2 GREEN BAG To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Elliptical Trainer. If any parts, hardware or tools are missing, please call 1.800.335.4348 NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Elliptical Trainer to prevent loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before completely tightening any ONE screw. A s s e m b l y G u i d e X6000 ELLIPTICAL TRAINER STEP 6 BLACK BAG STEP 1 STEP 2 • On the right side, slide the dualaction axle cover onto the console mast axle. Slide a wavy washer (25x34x2T) onto the axle. Slide the right dual-action arm on the axle. Fix in place with the washer (8x38x2T) and locknut (M8). Cover with the included nut cap. • Insert the sleeve into the socket joint of the lower link arm. Connect the lower link arm to the dual action arm with a bolt (M8x30L). Attach the washer (8x25x1.5T) and nut (M8) to the end of the bolt. Tighten with the 5mm L-Shaped wrench and 13mm wrench. • Position the link arm cover over the joint of the lower link arm and secure the two pieces of the cover together with a panhead bolt (M4x15L). Connect the cover to each side of the lower link arm with a washer (5x10x1T) and bolt (M5x12L). • Repeat these steps on the left side. STEP 6 Pedal Arm Bracket Cover Rotation Axle STEP 1 • Place a piece of packaging under the front of the unit to aid in assembly. • Secure the front stabilizer to the base frame with four bolts (M8x25L) and arc washers (8x17x1.0T). Tighten with the 5mm L-shaped wrench. YELLOW BAG Guide Rail Pedal Arm Console Console Mast Boot Frame Bracket Guide Rail Stabilizer STEP 2 • Connect the guide rail support bracket to the left and right guide rails with two washers (8x20x2T) and two bolts (M8x15L). Tighten with the 5mm T-handle wrench. • Slide the bracket ends of the guide rails over the rear frame tube. Secure with arc washer (8x17x1.0T), lock washer (8x15x2T) and bolt (M8x25L) to the top holes in the guide rails. Secure with arc washer (10x20x1.5T), lock washer (8x15x2T) and bolt (M8x75L) to the front holes in the guide rails. Tighten wit...