Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
.” Washers (#17), and M10 Aircraft Nuts (#18). Do NOT tighten the Nuts and Bolts yet. B.) Attach a Lower Upright Beam (#5) onto the Right Stabilizer (#2). Secure it with two M10 x 2 .” Carriage Bolts (#19), one 5 .” Bracket (#12), two . .” Washers (#17), and two M10 Aircraft Nuts (#18). Repeat the same procedure to install the other side. NOTE: Do NOT tighten all the nuts and bolts yet. DIAGRAM 1 5 STEP 2 (See Diagram 2) A.) Attach a Diagonal Support (#4) to the Lower Upright Beam (#5) and the Right Base Frame (#2). Secure it to the Lower Upright Beam with two M10 x 3” Carriage Bolts (#20), O 1 .” Bent Washers (#22), and M10 Aircraft Nuts (#18). Secure it to the Right Base Frame with two M10 x 2 .” Carriage Bolts (#19), one 4 .” Bracket (#13), two O .” Washers (#17), and two M10 Aircraft Nuts (#18). B.) Attach a Dip Support (#9) to the Lower Upright Beam. Align the holes and secure them with two M10 x 3 1/8” Carriage Bolts (#21), one Curve Bracket (#11), and two M10 Aircraft Nuts (#18). Repeat the same stop to install the other side. C.) Attach two Upper Upright Beams (#6) onto the Lower Upright Beams (#5). D.) Connect the two Upright Beams with a Cross Brace (#7) in the middle. Secure each side with two M10 x 3” Carriage Bolts (#20), . 1 .” Bent Washers (#22) and M10 Aircraft Nuts (#18). Do NOT tighten all the Nuts and Bolts yet. E.) Attach a Vertical Handle (#8) to the Dip Support. Secure it with one M10 x 1” Allen Bolt (#31) and O .” Bent Washer (#24). Repeat to install the other side. 6 DIAGRAM 2 7 STEP 3 (See Diagram 3) A.) Attach the Chin-up Bar (#10) to the top opening on the two Upper Upright Beams. Secure the Chin-up Bar to each opening with one M8 x 1 5/8” Allen Bolt (#27) and O .” Bent Washer (#34). Cover each opening with an Upright Beam End Cap (#30). B.) Attach the two Arm Pads (#15) onto the Dip Supports. Secure each Arm Pad with two M8 x 2 .” Allen Bolts (#16) and O 5/8” Bent Washers (#26). C.) Attach the Backrest Board (#14) to the Cross Brace (#7). Secure it with two M8 x .” Allen Bolts (#29) and O 5/8” Washers (#28). D.) Securely tighten all Nuts and Bolts previously installed. 8 EXPLODED DIAGRAM 9 Parts list KEY NO. DESCRIPTION Q’ty Left Base Frame 1 Right Base Frame 1 Stabilizer 1 Diagonal Support 2 Lower Upright Beam 2 Upper Upright Beam 2 Cross Brace 1 Vertical Handle 2 Dip Support 2 Chin-up Bar 1 Curve Bracket 2 5 .” Bracket 2 4 .” Bracket 2 Backrest Board 1 Arm Pad 2 M8 x 2 .” Allen Bolt 4 O .” Washer 12 M10 Aircraft Nut 24 M10 x 2 .” Carriage Bolt 12 M10 x 3” Carriage Bolt 8 M10 x 3 1/8” Carriage Bolt 4 O 1 .” Bent Washer 8 2” Base Frame End Cap 4 O .” Bent Washer 2 O 2” Sleeve 2 O 5/8” Bent Washer 4 M8 x 1 5/8” Allen Bolt 2 O 5/8” Washer 2 M8 x .” Allen Bolt 2 Upright Beam End Cap 2 M10 x 1” Allen Bolt 2 6 .” Grip 4 6” Grip 2 O .” Bent Washer 2 5” Grip 2 10 IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be prepaid by the customer. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized service center or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by IMPEX. IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you. This warranty gives you specific legal right. You may also have other rights which vary from state to state. Register on-line IMPEX INC. 14777 Don Julian City of Industry, CA 91746 ORDERING REPLACEMENT PARTS Replacement parts can be ordered by calling our Customer Service Department toll-free at 1-800-999-8899 d...