|
Фрагмент инструкции
Show numoor of steps Press MODE until the text 'STEP' is shown in the display. Show distance Press MODE until the text ‘MIL' (or KM if KM is selected) is shown in the display. Show consumed calories Press MODE until the text "CAL' is shown in the display. Show timo spont walking or running Press MODE until the text "TMR" is shown in the display. The timer is automatic and starts when starting walking/jogging and stops when stopping. Reset the Pedometer Press and hold MODE and SET buttons simultaneously for a second and the counter is reset. Change of distance-, and weiflhLUJ.it The Pedometer default setting is mile (and ft for stride length). This can be changed to km/cm and kg: Press and hold MODE and SET buttons simultaneously for 5 seconds. The display will now show KM instead of MIL and kg instead of lb in the body weight setting Repeat to change back. Filter function The Pedometer has a function lhat prevents accidental registration of steps when standing still or at short accidental movements that is not part of the walk/jog. For correct step counting 6 steps in a row must be taken without a stop. Battery Replacement 1. Change battery when the display dims. Use a very small phillips screwdriver to open the rear case. 2. Using a ball point pen or similar tool, push the battery toward the top of the step counter to remove it from the slot. Ensure that the replacement battery is put in the same way. with the side facing up. Replacement battery is type L1142. Battery life is approx . 1 year. 3.Press "MODE' and ’SET” key to reset the pedometer. Other useful information The Step Counter is not waterproof or shockproof, so handle it as a precision instrument. Warranty 1 year warranty against manufacturing faults. The warranty does not apply to modifications, normal wear and tear or abuse. The Battery is not covered by this warranty. CP BRU TOIM w.v\vt>'unton.com BKU1203-120-»...
Эта инструкция также подходит к моделям:Тренажеры - STEP COUNTER 15-FPED 1204B (207.6 kb)