Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
3. Then close the disc compartment by pressing OPEN/CLOSE. After closing the disc cover, the CD system immediately begins to scan the content of the compact disc. iLuv | 18 iMM9400/9500 | V10M10_IM_EN_060509 OPERATIONAL INSTRUCTIONS CD and MP3 CD Operation - continued Playing the entire CD Press to play all CDs. Once the playback of one CD has finished, the next inserted CD begins, and so on. Note: If the CD player is in the stop position, you can start the currently indicated CD by pressing . If you select a different CD by pressing CD SELECTION 1 - 4 . Playback will start automatically. For MP3 CD, change folder (album) by pressing or . Pause / Stop To pause playback, press . The display indicates: 1. Press again to restart play. 2. To end the playback, press FM MODE/ . Random play 1. Press before or during CD play. The tracks in the CD will be played in random sequence. 2. To cancel random play, press FM MODE/ , or press again. “” will disappear from the display. 19 | iLuv OPERATIONAL INSTRUCTIONS CD and MP3 CD Operation - continued Repeat play 1. Press once and the track being played will replay continuously. “1” will appear on the display. 2. Press twice to play the current CD continuously. “ ALL” will display. 3. Press three times to have the all CDs played continuously. Track selection Press or to select the desired tracks. Search operation While the CD is in play mode you can scan tracks by holding down or . The CD will continue to play until you find the track you want. When you release the button the unit will resume normal play mode. Track intro-scan 1. Press INTRO while in stop mode to play the first 10 seconds of each track on all inserted CDs. 2. Press INTRO again and the selected track will play. Mute function If MUTE is pressed, the audio output will be muted, and the “MUTE” indicator will be displayed. To cancel “MUTE” press MUTE once more or press VOLUME +/-. Program memory for Audio CDs The built-in program memory lets you play up to 40 tracks in the order of your choice. A track can be stored more than once within the program. 1. Load the CDs. 2. Press TIMER/MEMORY in the stop mode to switch to programming mode. “MEMORY” will blink on the display. iLuv | 20 iMM9400/9500 | V10M10_IM_EN_060509 OPERATIONAL INSTRUCTIONS CD and MP3 CD Operation - continued 3. Press or to select the track to be programmed. 4. Press TIMER/MEMORY to save the track in the first program location. For example, if you selected track number 14, it will appear in Program position 1 as shown below. 5. For the next program position, select another desired track (It is not necessary to select CD if the track is in the same CD). 6. Confirm the selection using the TIMER/MEMORY. 7. To program other tracks in the memory, repeat steps 3 - 6. To play the program, press . The program can be played back again as long as “MEMORY” appears on the display. To clear the programming and resume normal playback The programming is erased by pressing FM MODE/ until the “MEMORY” display disappears, or by opening the CD changer door. If the unit is switched off, the program is erased. Notes 1. RANDOM will not function in programmed play. 2. This unit counts all the folders on an MP3 disc, even if a folder doesn’t contain any MP3 file(s). If you select a folder which doesn’t contain any MP3 file(s), the unit will automatically skip to the next folder until it finds one containing an MP3 file(s). 21 | iLuv OPERATIONAL INSTRUCTIONS CD and MP3 CD Operation - continued Program memory for MP3 CDs The built-in program memory enables up to 40 titles to be played from one disc in the order of your choice. Any title can be stored more than once within one program. 1. Load the CDs. 2. Press TIMER/MEMORY in the stop mode to switch to programming mode. 3. Select the desired folder (album) by repeatedly pressing or . 4. Select the desired track by pressing or to select: 5. Confirm selection using TIMER/MEMORY to save the track in the first location. 6. To store the remaining titles in the memory, repeat Steps 3-5. To play back the program, press . When is pressed, the program can be played back again as long as “MEMORY” appears on the display. To clear the programming and resume normal playback The programming is erased by pressing FM MODE/ in the programming mode (until “MEMORY” display disappears), or by opening the disc compartment. Note: is not used for programming. ID3 TAG (Artist/Title) 1. When an MP3 disc is playing, MP3 INFO repeatedly. The track no., title and artist information will be shown in the display if disc information is available. 2. To resume normal play display, press MP3 INFO repeatedly until playing time reappears. iLuv | 22 iMM9400/9500 | V10M10_IM_EN_060509 Memory Card and USB Operation Playing MP3/WMA audio files from SD/MMC memory cards or USB Devices 1. Press MODE repeatedly or SD Card or USB until the main display shows “ “, for SD card or “ ” for USB. 2. Insert the SD or MMC flash memory card or USB flash containing MP3/ WMA...
Эта инструкция также подходит к моделям:Тренажеры - IMM9400 (1.15 mb)