Оценок - 1, средний балл: 3
(
)
)
|
Фото и характеристики Vision Fitness X6250HRT |
Фрагмент инструкции
Box 280 • Lake Mills. WI 53551 toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373 ©2007 Vision Fitness. All Rights Reserved. 1.07 AG18.51PRD REV1 TOOLS & PARTS INCLUDED HARDWARE INCLUDED HARDWARE INCLUDED 6mm L-Shaped Wrench 5mm T-Shaped Wrench 13mm Wrench Screwdriver PARTS BOX Console Mast Cover Accessory Tray/Water Bottle Cage Color-coded Hardware Bags Heart Rate Chest Strap (X6250HRT Only) Power Cord Owner’s Guide Assembly Guide Warranty Card 4mm L-Shaped Wrench 15mm Wrench 5mm L-Shaped Wrench ORANGE BAG M4x15L Screw Quantity: 4 PINK BAG GREEN BAG M8x25L Socket Head Bolt Quantity: 5 M8 Lock Washer Quantity: 5 8x18x1.5T Flat Washer Quantity: 4 8x18x1.5T Arc Washer Quantity: 1 8x18x1.5T Flat Washer Quantity: 4 M8 Lock Washer Quantity: 8 M8x60L Bolt Quantity: 4 8x18x1.5T Arc Washer Quantity: 4 M8x45L Bolt Quantity: 2 M8x45L Fully Threaded Bolt Quantity: 4 BLUE BAG M5x10L Bolt Quantity: 6 8x25x1.5T Washer Quantity: 2 5x10x1T Washer Quantity: 6 M8x20L Bolt Quantity: 2 M5x12L Flathead Bolt Quantity: 8 8x25x1.5T Washer Quantity: 2 M8 Nut Quantity: 2 M5x10L Bolt Quantity: 4 5x10x1T Washer Quantity: 4 Axle Sleeve illustration not to scale Quantity: 2 Spacer Ring illustration not to scale Quantity: 4 M5x12L Screw X6250HRT Only Quantity: 4M8x10L Set Screw Quantity: 2 STEP 4 • Line up the holes in the right dualaction arm with the holes on the right rotation housing. Insert two bolts (M8x60L), with a lock washer (M8) and an arc washer (8x18x1.5T), through the holes in the center of the dual-action arm and thread into the rotation housing. Next, insert two fully threaded bolts (M8x45L), with a lock washer (M8) and a flat washer (8x18x1.5T), through the flange on the side of the dual-action arm and into the rotation housing. Tighten all bolts with the 5mm T-handle wrench. • Position the rotation housing cap over the dual-action arm and snap in place. • Slide the axle sleeve through the socket joint on the right link arm. Slide a spacer ring onto each side of the axle sleeve. • Slide the link arm axle sleeve between the teeth on the bottom of the dual-action arm bracket. Insert a bolt (M8x45L) through the dual-action arm bracket and link arm axle sleeve. Fix in place with a washer (8x25x1.5T) and nut (M8). Tighten with the 13mm wrench and 5mm L-shaped wrench. • Attach a cover to the left and right side of the dual-action arm connection joint. Fix each side in place with the washer (5x10x1T) and bolt (M5x10L). Tighten with the screwdriver. • Repeat these steps on the left side. GREEN BAG A s s e m b l y G u i d e X6150 AND X6250HRT INCLINE ELLIPTICAL TRAINERS To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Elliptical Trainer. If ...
Эта инструкция также подходит к моделям:Тренажеры - X6150 (1.6 mb)