Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Kobe Range Hoods, модель CH0348SQB

Производитель: Kobe Range Hoods
Размер: 2.54 mb
Название файла:
Язык инструкции:enesfr
Перейти к скачиванию



Фрагмент инструкции


All measurements in ( ) are millimeters. . All inch measurements are converted from millimeters. Inch measurements are estimated. - FOR UNDER THE CABINET MODEL NO.: CH0330SQB CH0336SQB CH0342SQB CH0348SQB - FOR WALL MOUNT - MODEL NO.: CH0330SQB CH0336SQB CH0342SQB CH0348SQB 16 - FOR WALL MOUNT (WITH OPTIONAL DUCT COVER) 17 ***Rear Knocko ut Holes ***Hood-Mounting Bracket PARTS LIST MODEL NO.: CH0330SQB CH0336SQB CH0342SQB CH0348SQB NO. DESCRIPTION MODEL /SIZE PART NO. 1 Ducting Transition FA-12001-0506-01 (B001-2) 2 Hood Casing CH0330SQB 10-2130 CH0336SQB 10-2136 CH0342SQB 10-2142 CH0348SQB 10-2148 3 Control Unit C1-0501-0101 4 Control Board C1-0404-0401-A 5 Halogen Light Unit (12V 20W Max.) C1-0403-0101 6 Motor FA-12001-0302-01 (B001-4.5) 7 Lamp Socket Cover C1-0204-2130 8 Lamp Socket C1-0414-0120 9 Safety Screen FA-12001-0602-01 (B001-4.2) 10 Capacitor Panel CH0330SQB C1-0201-2130 CH0336SQB C1-0201-2136 CH0342SQB C1-0201-2142 CH0348SQB C1-0201-2148 11 Transformer (Light) CH0330SQB C1-0402-0120-40 CH0336SQB CH0342SQB C1-0402-0120-60 CH0348SQB 12 Capacitor FA-12001-0401-01 13 Transformer (Motor) C1-0402-A-120-01 14 Processor Board Box C1-0501-0102 15 Processor Board C1-0404-0401-B 16 Screw (1/8” x 3/8”) C1-0708-0003 17 Baffle Filter B101-2130-15 18 A B C D Bottom Casing 4” Wide CH0030SQB B101-2130-09 4” Wide 3” Wide CH0036SQB CH0036SQB B101-2136-09 5-1/4” Wide CH0042SQB B101-2142-09 4-1/2” Wide CH0048SQB B101-2148-09 BLOWER ASSEMBLY NO. DESCRIPTION MODEL /SIZE PART NO. 6-1 Screws (3/16” x 3/8”) B001-4.1 6-2 Left Locknut B001-4.3 6-3 Left Squirrel Cage B001-4.4 6-4 Right Squirrel Cage B001-4.6 6-5 Right Locknut B001-4.7 6-6 Air Chamber B001-4.8 (Optional Duct Cover) ORIGINAL KIT NO. DESCRIPTION MODEL /SIZE PART NO. 01 Hood-Mounting Bracket C1-0221-0330 02 Screw (3/16” x 3/8”) C1-0707-0001 03 Duct Cover CH0030DC-12 B102-6012-030 CH0036DC-12 B102-6012-036 CH0042DC-12 B102-6012-042 CH0048DC-12 B102-6012-048 04 Screw (3/16” x 3/8”) C1-0707-0001 18 MODEL NO.: CH0330SQB CH0336SQB 19 MODEL NO.: CH0342SQB CH0348SQB 20 CIRCUIT DIAGRAM MODEL NO.: CH0330SQB CH0336SQB 21 MODEL NO.: CH0342SQB CH0348SQB 22 TROUBLE SHOOTING Issue Possible Cause Solution After Installation, both motors and lights are not working. The power is not on. Make sure the circuit breaker and the unit’s power is ON. Use a voltage meter to check the power supply. The wire connection is not secure. Check and tighten wire connection. The control panel and processor board wiring are disconnected. Check wire continuity from control panel to processor board. The motor transformer is defective. Check the power input and power output on the motor transformer. If it’s needed, replace the motor transformer. The control panel and processor board is defective. Replace the control panel or processor board. Lights are working, but motor(s) is not. The motor(s) is defective. Replace the motor. The capacitor(s) is defective. Replace capacitor(s). The control panel or processor board is defective. Replace the control panel or processing board. The range hood is vibrating. The blower system is not secure. Tighten the turbine impeller/squirrel cage and air chamber. The turbine impeller/squirrel cage is not balanced. Replace the turbine impeller/squirrel cage. Hood is not secured in place. Check the installation of hood, tighten the mounting bracket. The motor is working, but the lights are not working. Halogen Light bulb(s) is defective. Try placing the trouble light bulb(s) to a working socket, if the bulb(s) still doesn’t work; replace the halogen light bulb(s). The light wiring(s) is loose. Check wire continuity from processor board to light transformer to halogen light housing(s). Light transformer is defective. Check power input and power output on the light transformer. If it’s needed, replace the light transformer. The control panel or processor board is defective. Replace the control panel or processing board. The range hood is not venting out correctly. The range hood is installed outside of the manufacture recommended clearance. Adjust the clearance between the range hoods and cook top to 27” to 30”. For Island range hood and professional series range hood, the clearance between the range hoods and cook top is 30” to 36”. There is no make-up air inside the house. Open the window to enhance the performance of the range hood by creating a sufficient makeup air. Obstacle blocking the pipe work. Remove all obstacles from the duct work. The pipe size is smaller than the suggested pipe size. Change the ducting according to the manufacture suggestion. Cold air is coming into the home. The pipe connection is not properly sealed. Check the pipe installation. 23 DISCLAIMER 1. CAREFULLY INSPECT ALL ITEMS FOR DAMAGES BEFORE ACCEPTING DELIVERY. NOTE ANY DAMAGES ON THE FREIGHT BILL OR EXPRESS RECEIPT. REQUEST NAME AND SIGNATURE OF THE CARRIER’S AGENT AND KEEP COPY TO SUPPORT YOUR CLAIM. Upon acceptance of items, owner assumes responsibility for its safe arrival. Report da...

Эта инструкция также подходит к моделям:
Тренажеры - CH0336SQB (2.54 mb)
Тренажеры - CH0330SQB (2.54 mb)
Тренажеры - CH0342SQB (2.54 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории