Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Item #42 (1) Item 47 (5)* Item #17 (14)Item #14 (2) Item #10 (3)* Item #34 (3) Item #53 (2) Item #13 (12)* 3 12/03 P/N 214946E HARDWARE IDENTIFIER (STEEL SPACERS & RODS) Item #39 (2) Item #7 (1) HARDWARE IDENTIFIER (PLASTIC SPACERS, CAPS & CLIPS) Item #36 (1) Item #44 (4) Item #55 (4) Item #57 (1) Item #31 (12) HARDWARE IDENTIFIER (OTHER) Item #48 (1) P/N 214946E 12/03 4 PARTS LIST - See Hardware Identifier Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Qty. 1 1 4 1 1 1 1 1 1 3* 2 1 12* 2 1 2 12 2 1 1 2 1 1 1 2 1 1 1 2 2 Part No. Description 206615 Tank, (Black) 200628 Wheel Axle, 11-3/4 Long 226401 Wheel, 4 “ (Black) 900007 Top Pole Section 908480 Middle Pole Section 900240 Bottom Pole Section 202820 Rod, 3/8 O.D. x 4-3/4 Long 206934 Eyebolt, 3/8-16 x 2 1/2 Long 206949 Pivot Bracket, Upper 203063 Nylon Insert Lock Nut, 3/8-16 906206 Strut, 1” O.D. x 31-1/4 Long 201625 Bolt,Yellow Dichromate, 5/16-18 X 3.60" Long 203218 Washer, Flat, 3/8 I.D. 203220 Nylon Insert Lock Nut, 5/16-18 201568 Anchor, T-Strap 203798 Bolt, Hex Flange, 5/16-18 x 1-1/2 Long 203100 Nut, Hex Flange, 5/16-18 203103 Carriage Bolt, 5/16-18 x 2 Long 900223 Wheel Bracket 206948 Pivot Bracket, Lower 206252 Bolt, Hex Head, 3/8-16 x 1 Long 206956 Disc, 5" O.D. x 13/32 I.D., Plastic 906606 Handle Bar 206940 Axle, 21" Long 206938 Push Cap 203330 Bolt, Hex Head, 3/8-16 x 4-1/2 Long 206604 Handle, Front, Plastic 206605 Handle, Back, Plastic 203038 Bolt, Carriage, 5/16-18 x 2-3/4 Long 203217 Carriage Bolt, 5/16-18 x 1-1/2 Long Item Qty. Part No. Description 31 12 201219 Smart Clip, Net Holder 32 1 Rim 33 1 206360 Bolt, Hex Head, 3/8-16 x 2.625 Long 34 3 201124 Nut, 3/8-16 35 5 206304 Bolt 1/2-13 x 6-5/16 Long 36 1 200516 Vinyl Bolt Cover, 5/16 37 1 202814 Cap, Pole Top 38 2 900846 Board Bracket, (Black) 39 2 201129 Spacer, 1-3/4 Long 40 1 201160 Pawl Lever 41 1 240017 Bolt, Hex Head, 1/4-20 x 2-1/4 Long 42 1 203493 Lock Nut, Hex Head 1/4-20 43 4 804808 Elevator Tube, (Black) 44 4 206311 Spacer, Plastic 45 4 204804 Screw, Phillips Head, 3/4 Long 46 1 201159 Ratchet 47 5* 206340 Lock Nut, Hex Head, 1/2-13 48 1 206305 Clevis Pin 1/4 x 2-9/32 Long 49 1 203124 Stake, Tie Down 50 2 203617 Plug Cap 51 1 201268 Label, Height Adjustment and Moving 52 1 Net 53 2 206303 Washer, 1/4 x 9/32 I.D. 54 1 200627 Wheel Carriage 55 4 201651 Spacer, Plastic, Wheel Axle 56 1 201125 Return Ratchet Spring 57 1 202587 Spacer, Plastic, 1" Long 58 1 203365 Rim Spacer, Plastic WARRANTY CARD: Please remember to complete your product registration form either on-line at: or mail-in the enclosed postcard. WARNING: IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD COULD RESULT IN SUDDEN BREAKAGE. IF BACKBOARD IS DAMAGED IN ANY WAY PRIOR TO OR AFTER ASSEMBLY, CALL TOLL-FREE NUMBER FOR FREE REPLACEMENT: U.S. 1-800-558-5234; CANADA: 1-800-284-8339; 5 12/03 P/N 214946E INSTRUCTIONS 20. WARNING: TWO PERSON MINIMUM REQUIRED FOR THIS IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY RESULT THIS OWNERS MANUAL IN BODILY INJURY. Starting with nuts (17) flush against backboard bracket (38), secure spacer (58), rim, and bracket to backboard. Bend upper halves of backboard brackets to line up with holes in backboard and secure. Tighten completely. NOTE: Mounting nuts and bolts supplied with rim hardware. 21. Assemble elevator tubes (43) to backboard bracket as shown. 22. WARNING: TWO PERSON MINIMUM REQUIRED FOR THIS PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY RESULT IN BODILY INJURY. Support pole on sawhorse. Attach backboard assembly to top pole section (4) as shown. Then install pole cap (37). NOTE: Two people are recommended for this step, use caution, elevator assembly is heavy. 23. WARNING: DO NOT LEAVE ASSEMBLED UNIT UNATTENDED WHEN EMPTY, MAY TIP OVER. NOTE: Two people recommended for this procedure. Roll the completed assembly to the desired playing area. Insert the T-strap (15) through the slot on the back of the base as shown. Secure the unit to ground by twisting the tie down stake (49) into the ground and hooking the T-strap (15) onto the tie down stake (49). Fill tank with 33 gallons of water. IMPORTANT! Add 2 gallons (7.6 liters) of non-toxic antifreeze in sub-freezing climates. 24. Apply height adjustment and moving label (51) to front of pole as shown. Regulation rim height is 10 feet (3.05 m). WARNING: DO NOT ALLOW CHILDREN TO ADJUST HEIGHT. WARNING: USE OF THIS PRODUCT WITHOUT PROPER INSTALLATION OF SMART CLIPS, OR WHEN ALL SMART CLIPS ARE NOT PRESENT COULD RESULT IN BODILY HARM. BE SURE TO FOLLOW DIRECTIONS CAREFULLY. 25. Install net clips as shown. (See illustration) 26. Install net as shown. (See illustration) SPRINGS. P/N 214946E 12/03 6 IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF THIS OWNERS MANUAL 11. 2 55 553 3 54 2...