Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
831.287724 Serial No. Write the serial number in the space above for future reference. bet Decal EX F_.R C I '=_E: EOUIPMENT HELPLINEI 1-800-736-6879 USER'S MANUAL PUSH MODE SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 TABLE OF CONTENTS IMPORTANT PRECAUTIONS ................................................................ 2 BEFORE YOU BEGIN ....................................................................... 3 ASSEMBLY ................................................................................ 4 HOW TO USE THE CARDIO FIT PLUS ......................................................... 5 MAINTENANCE AND TROUBLE-SHOOTING .................................................... 8 CONDITIONING GUIDELINES ................................................................ 9 PART LIST ................................................................................ 10 EXPLODED DRAWING ..................................................................... 11 ORDERING REPLACEMENT PARTS .................................................. Back Cover WARRANTY ...................................................................... Back Cover BEFORE YOU BEGIN Thank you for selecting the SEARS°LIFESTYLER CARDIO FIT PLUS. The CARDIO FIT PLUS offers a unique form of low-impact exercise that uses both the upper body and lower body for increased cardiovascular benefits and greater toning results. For a more complete workout, the CARDIO FIT PLUS features both a push mode and a pull mode, and the adjustable resistance cylinder lets you tailor the intensity of your exercise to your individual fitness level. For your benefit, read this manual carefully before using the CARDIO FIT PLUS. If you have additional questions, please call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until7 p.m. Central Time (excluding holidays). To help us assist you, please note the product model number and serial number when calling. The model number is 831.287724. The serial number can be found on a decal attached to the CARDIO FIT PLUS (see the front cover of this manual for the location of the decal). Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled. Quick Adjust Handle Handlebar Padded Seat---..--. Rollers for Push Mode Seat Knob Resistance Cylinder __.._. Rollers for piOiiilre BACK Pedal FRONT RIGHT SIDE ASSEMBLY Place all parts of the CARDIO FIT PLUS in a cleared area and remove the packing materials. Do not dispose of thepackingmaterialsuntilassemblyiscompleted.Readeach stepcarefullybeforebeginning. THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: The Included pedal tool (_, and your own phillips screwdriver -_,-E_), and rubber mallet _=_D. 1. Raise the Handlebar Frame (7) to the positionshown. Hold the Handle (20) and hook the Link Arms (4) onto the lower Rollers (33) on the Handlebar Frame. 7_ Press two Round Endcaps (8) onto the stabilizer at the front of the Frame (6). Press two Round Endcaps onto 33 the stabilizer at the rear of the Frame (not shown). 2. Turn the Seat Knob (38) to loosen it. Pull down the Seat Knob and slide the Seat (3) onto the Seat Frame 2 (5). Slide the Seat to the desired position and release the Seat Knob. Retighten the Seat Knob• Push on the 5 Seat to make sure that the Seat Knob is engaged In 3 one of the holes in the underside of the Seat Frame. 38 3. Press the two Domed Endcaps (13) onto the upper 3 end of the Handlebar Frame (7). Insert the Handlebar (2) into the Handlebar Frame (7). The sides of the Handlebar must bend toward the Seat (not shown). Tighten the four #8 x 1/2" Screws (16) into the Handlebar Frame and the Handlebar. 41 Connect the Sensor Wire (15) to the wire on the Monitor (1). Insert all excess wire into the Frame (6). Hold the Monitor (1) with both hands, and slide it down onto the Frame (6). Refer to the inset drawing. Make sure that the side of the Monitor is between the Frame and the indicated 1/2" Dome Cap (29). Push the 1/2" Dome Cap against the side of the Monitor. Slide the Foam Pad (26) onto the end of the 1/2" x 6 1/2" Axle (39). 5. Apply a small amount of grease to the shaft on the right side of the Pedal Frame (32). Slide a Pedal (12) onto the • shaft. Make sure that the Pedal is tumed so the plastic tube is facing the Pedal Frame. Using the included pedal -tool, tap a 1/2" Push Nut (30) onto the shaft. Make sure that the Push Nutis turned as shown in the inset drawing. 5 "_ Front View Attach the other Pedal (not shown) in the same manner. Note: Extra 1/2" Push Nuts (30) may have been included. Save the Push Nuts and the pedal tool in case replacement Push Nuts are needed in the future. Note: The CARDIO FIT PLUS features a precision resistance cylinder; due to the nature of resistance cylinders, it is recommended that the floor underneath the CARDIO FIT PLUS be covered in case of slight oil leakage. HOW TO USE THE CARDIO FIT PLUS HOW TO ADJUST THE POSITION OF THE SEAT Before you begin exercising...