Оценок - , средний балл:
(
)
)
Производитель: Evo Fitness
Размер: 725.36 kb
Название файла: Tahoe-EVO_manual_Bench.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your EVO home gym. Name: Phone Number: Receipt: Open the boxes You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Parts List for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions contact your local Smooth Retailer. Gather your tools Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free. Clear your work area Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure space is flat, level and free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable amount of free area around the unit for unobstructed operation. Invite a friend Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person when assembling this product. -2 parts list A MAJORITY OF THE LISTED HARDWARE IS ALREADY IN PLACE NUMBER 201 202 203 204 205 209 210 214 215 DESCRIPTION FRONT STABILIZER MAIN FRAME REAR STABILIZER BACK BONE SEAT ARM BACK PAD SEAT PAD 2” SQ END CAP 2” SQ END PLUG QUANTITY 1 1 1 1 1 1 1 2 4 ORDER NUMBER 51552B-201 51552B-202 51552B-203 51552B-204 51552B-205 51552B-209 51552B-210 51552B-214 51552B-215 201 202 203 204 205 209 210 214 215 1/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/4 0 1”2”3”4” INCHES -3 A MAJORITY OF THE LISTED HARDWARE IS ALREADY IN PLACE 0 1” 2” 3” 4” 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/4 1/4 INCHES 1/4 1/2 3/4 5” 1/4 1/2 3/4 6” parts list -4- ORDER NUMBER 51552B-220 51552B-221 51552B-222 51552B-225 51552B-226 51552B-227 51552B-228 51552B-229 51552B-230 51552B-231 51552B-232 51552B-235 51552B-237 51552B-240 51552B-241 51552B-242 DESCRIPTION STOPPER WHEEL POP PIN 1/2” STEEL BUSHING 3/8” X 1/2” BUSHING 1/2” X 4-1/4” HEX HEAD BOLT 1/2” X 3-1/8” HEX HEAD BOLT 3/8” X 2-3/4” HEX HEAD BOLT 5/16” X 1-1/2” HEX HEAD BOLT 3/8” X 2-3/4” HEX HEAD BOLT(ALL THREADED) 3/8” X 5/8” INNER HEX HEAD SCREW 1/2” WASHER 3/8” WASHER 1/2” NYLON NUT 3/8” NYLON NUT 5/16” NYLON NUT NUMBER 220 221 222 225 226 227 228 229 230 231 232 235 237 240 241 242 QUANTITY 12242221241 10 6612 235 237 240 241 242 230 231 232 228 229 226 227 222 225 220 221 parts diagram MANY PARTS SHOWN HAVE BEEN PRE-ASSEMBLED BY THE FACTORY -5- 215 231 237 204 237 231 225 225 235 240 235 203 221 230 242 242 230 235 228 235 220 232 228 201 214 229 237 226 227 235 202 235 215 240 222 226 237 241 209 210 225 205 235 235 222 231 237 221 215 Step 1: Cap Front Stabilizer (201) with 2" Sq End Caps (214). Place Front Stabilizer (201) on the floor. Cap Main Frame (202) with 2" Sq End Plug (215). Attach Stopper (220) to Main Frame (202) using 3/8" x 5/8" Inner Hex Head Screw (232). Attach Main Frame (202) to Front Stabilizer (201) using two 1/2" Washers (235) and two 1/2" Nylon Nuts (240). Attach Wheels (221) to the bracket on Rear Stabilizer (203) each using 5/16" x 1-1/2" Hex Head Bolts (230) and 5/16" Nylon Nut (242). Attach Rear Stabilizer (203) to Main Frame (202) using two 1/2" x 3-1/8" Hex Head Bolts (228), four 1/2" Washers (235) and two 1/2" Nylon Nuts (240). assembly instructions -6- ASSEMBLY 235 240 203 221 230 242 230 232 220 235 228 202 215 240 235 201 214 235 221 235 228 240 235 assembly instructions -7- Step 2: Cap Back Bone (204) with 2" Sq End Plug (215). Attach Back Pad (209) to Back Bone (204) using two 3/8" x 2-3/4" Hex Head Bolts (231) and two 3/8" Washers (237). Insert two 1/2" Steel Bushings (225) to the sleeve on Back Bone (204). Attach Back Bone (204) to the bracket on Main Frame (202) using 1/2" x 4-1/4" Hex Head Bolt (227), two 1/2" Washers (235) and 1/2" Nylon Nut (240). Lock Back Bone (204) with Pop Pin (222). ASSEMBLY 240 215 237 204 237 231 225 209 202 222 235 227 225 235 assembly instructions -8- Step 3: Attach Seat Pad (210) to Seat Arm (205) using two 3/8" x 2-3/4" Hex Head Bolts (231) and two 3/8" Washers (237). Insert two 1/2" Steel Bushing (225) to the sleeve on Seat Arm (205). Attach Seat Arm (205) to the bracket on Main Frame (202) using 1/2" x 4-1/4" Hex Head Bolt (227), two 1/2" Washers (235) and 1/2" Nylon Nut (240). Lock Seat Arm (205) with Pop Pin (222). Insert 2” Sq End Plugs (215) into Seat Arm 205. ASSEMBLY 210 205 225 237 231 222 235 227 202 235 240 215 NOTE S notes -9 warranty WARRANTY Warranty Coverage: Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original purchaser that each new product to be free from defects in workmanship and material, under normal use and conditions. Period of Coverage: The Warranty on this product runs for the period of the lifetime of the...