Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
Measure, in in. or cm., the total distance from the line to the toe of the foot on the 10th stride and divide by 10. -Press (MODE) until Mode Indicator is under "DISTANCE". -Press (SET) to change Stride Length (Mode Indicator is next to "STRIDE"). -Press (SET) to increase Stride Length setting by ,05 ft. or 1 cm. (1-6 ft. or 35-150 cm., with rollover to minimum setting). Automatic return to DISTANCE Mode. STEP COUNT MODE (STEP) -Press (MODE) until Mode Indicator is under "STEP". -Measures ALL ACTIVITY Steps. PEDOMETER MODE (MILE/KM) -Press (MODE) until Mode Indicator is I under "DISTANCE". -Measures ALL ACTIVITY Distance. STOPWATCH MODE (0) -Press (MODE) until Mode Indicator is under Stopwatch symbol, -Press (START/STOP) to start, indicator flashes. -Press (START/STOP) to stop, indicator stops flashing. -Press (START/STOP) to restart, indicator flashes* When Stopwatch is stopped, -Press (RESET) to Reset to 0, RESET -Press (RESET) to reset Distance and Steps to 0. EXCLUSIVE ACCURACYTIP After setting Stride Length per instructions above, maximize the accuracy of Distance measurement by: -Walking a measured 0.5 or 1.0 mile/km. (we recommend that you use a 1A mile/400 meter track like those found at a “high school"). -Comparing the DISTANCE recorded to the measured distance, and -If UNDER recorded, resetting the STEP LENGTH to a longer setting, or if OVER recorded, resetting the STEP LENGTH to a shorter setting. -Pushing RESET to return the display to 0-Walking the track again to test the adjustment, and re-adjusting accordingly.' -Once adjusted DO NOT ALLOW ANYONE ELSE TO CHANGE THE SETTING, because the Fitness Meter is now set for your style. -You are now ready to walk or stroll any route, change that route freely and still get an accurate measurement of distance for your fitness or recreation program. BATTERY REPLACEMENT When the LCDisplay dims, replace the battery, with LR-44 or equivalent. -Use a coin to "pop open" the case. -Replace battery with "+" up, -Snap case parts together. -Power Reset (see below). POWER RESET -Push all 3 buttons for 5 seconds and Release (All LCDisplay segments will be OFF, until a button is released,) Specifications subject to change without notice. ASSEMBLED IN JAPAN © 1997-2002 AST Bat 'Right! Walk Morel Livt Weil! The ACCUSPLtT Lifestyle ACCUSPLIT, Inc. 3090 Independence Drive, Suite 148 Livermore, CA 94551 USA 800-935-1996 • 925-290-1900 FAX 925-290-1930 support@ACCUSPLIT.com...