Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
• Step filter, can be set from 0-5 steps to further increase accuracy. 2 22 3 ACCUSPLIT, Inc. 2290A Ringwood Ave., San Jose, CA 95131 800-965-2008 • 925-226-0888 • FAX 925-463-0147 • support@ACCUSPLIT.com Eat Right! Walk More! Live Well! The ACCUSPLIT Lifestyle 970-084 Sept 07 Operating Instructions ACCUSPLIT®EAGLE AE170XL PEDOMETER 14 Setting your Weight 1. (Continuing from above) -After pressing S2, you will see the “in” indicator go out, and the “lb” indicator come on.The display will show a flashing number, which is your Weight setting (in pounds). Note: Unit will show ”kg” for weight setting when in metric mode. 2. As before, press the S3 + (MODE) button to increase the Weight (in increments of . pound), and press the S3 -(RESET) button to decrease the Weight setting. Hold the buttons down to change values quickly. 3. Press the S2 button to adjust the Clock. 15 Note: If you need to go back and change some of the values, simply press S2 to cycle through all of the set points until you see the one you want to change. Exiting Set Mode Press and hold the S4 button for 2 seconds.The unit will exit setting mode – no values will be flashing anymore. Note:The unit will save any changes and exit set mode after 30 seconds unattended. 12 Finding Your Stride Length: Your stride length is the length of one of your steps, measured from “toe to toe.”To measure, walk 10 steps with your normal stride and measure theTOTAL DISTANCE from the toe of your starting step to the toe of your 10th step (see diagram below). Divide the TOTAL DISTANCE by 10, and multiply the decimal portion by 12 to find your stride length in feet and inches. Example:You walk 23 feet and 6. inches in 10 steps. Convert to feet only = 23.542 feet (6. . 12 = 0.542). Divide by ten to get the stride length in feet = 2.354 feet. Now, convert back to feet and inches to get your stride length = 2 feet 4.25 inches (0.354 . 12 = 4.25). 10 steps “lb” to indicate pounds 13 Setting Your Weight STEP DIST CAL SET DIGI-WALKERXL.COM 170 XL S3S3+ S1,S2,S4JW200 lb 10 STEP TIME DIST SET DIGI-WALKERXL.COM 140SXL S3S3+ S1,S2,S4JW200 in Setting Stride Length Stride Length Flashes “in” indicator for inches 11 Setting Stride Length 1. Press S2, repeatedly until the mode indicator bar is underneath DIST and the “in” indicator comes on. The display will show a flashing number, which is your Stride Length set point (in inches). 2. Press the S3 + (MODE) button to increase the Stride Length (in increments of . inch), and press the S3( RESET) button to decrease the Stride Length. Hold the buttons down to change values quickly. 3. Press the S2 button to adjust your weight setting. SETTING PROCEDURE We recommend that you adjust the settings all at once, using ACCUSPLIT products use a common setting procedure the procedure below. known as “S1-S2-S3-S4.” Here’s how it works: Press S1 for 2 seconds: Enter the SET mode Entering set mode Press S2: Change the field to be set Press and hold the S1 button for 2 seconds. Press S3: Change the field value The display will start to flash, showing that you’ve entered Press S4 for 2 seconds: Exit the SET mode SET mode. You can enter and exit Set mode from any of the regular display screens. Once in Set mode, you can cycle through all of these settings by pressing S2 repeatedly: Set Stride Length • Set Weight • Set Stride Length 8 9 22 STEP DIST CAL SET DIGI-WALKERXL.COM 170XL S3STEP DIST CAL SET DIGI-WALKERXL.COM 170XL S3S3+ S1,S2,S4JW200 Set measurement mode “US” (English) or “EU” (Metric) Can be set from 0-5 steps Set Step Filter set point STEP DIST CAL SET DIGI-WALKERXL.COM 170 XL S3S3+ S1,S2,S4JW200 23 CHANGING STEP FILTER SETTING While the JW200 PedometerEngine™ Step Sensor is extremely accurate, some people like to have the ability to filter out false steps. Therefore, the unit has a variable setting step filter, to allow fine-tuning to your specific preferences. You can set the value to any value from 0 – 5 steps. For example, if the filter is set to “3”, the unit will wait to start counting steps until more than three steps have been taken in less than five seconds. Press S3+ (MODE) or S3– (RESET) to change the Step Filter Setting. RESETTING YOUR PEDOMETER OTHER SETTINGS Most people prefer to reset counts daily.To reset your counts: The Step Filter and Unit of Measurement settings are From STEP, DISTANCE, or CALORIE mode, press and hold accessed through a special “deep set” mode. the yellow RESET button for at least 2 seconds.You’ll see the values all go back to zero. To enter this mode, press and hold the S1 button for 4 seconds.The screen will display a single digit. From within Deep Set mode, press the S2 button to cycle back and forth between the Step Filter set point and Choice of Unit System. 20 21 18 First, loop leash through slot on side of pedometer Next, clasp clothing Or, loop a belt or belt loop Or, loop a badge holder, then put into pocket (Badge holder not included) 19 VIEWING YOUR RESULTS Once yo...