Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
If the no battery symbol “ l ” appears, you must install the batteries at once. Install three new alkaline batteries LR6 (“AA” size) according to the procedure shown below with the AC cord connected and the mode switch set to the REG position: 1. Push the printer cover forward and detach it. Be careful with the paper cutter, so as not to cut yourself. 2. Open the battery compartment cover next to the paper roll cradle. 7 3. Insert three new alkaline batteries LR6 (“AA” size) as illustrated at the right. When the batteries are properly installed “ l ” on the display will disappear. 4. Close the battery compartment cover. Be sure to observe precautions shown on page 1 when handling batteries. 4 Installing a paper roll Precaution: The paper cutter is mounted on the printer cover. Take caution when removing and installing the cover. The register can print receipts or journals. For the printer, you must install the paper roll provided with the register, even when you program the register for not printing receipts or journals. Install the paper roll according to the procedure shown below with the AC cord connected and the mode switch set to the REG position: 1. Lift up the print roller release lever to unlock and open the print roller arm. 2. Set a paper roll in the paper roll cradle as illustrated at the right. ■ When setting a new paper roll in the paper roll cradle, be sure to cut the paper end behind the taped (or pasted) point in advance. 8 4. While holding down the paper, slowly close the print roller arm, and push down the arm until you hear a click locking the arm. Make sure securely you push down the center of the wing part of the arm as illustrated at the right. The paper will be fed automatically. I If the print roller arm is not securely locked, the unit will not print correctly. If this problem occurs, open the arm, and close the arm as instructed above. 5. When not using the take-up spool (using as receipt paper): • Cut off the excess paper using the edge of the inner cover, and replace the printer cover. Press the (F key to make sure the paper end comes out of the printer cover and clean paper appears. If the paper end does not come out, open the printer cover, and pass the paper end between the paper cutter and the paper guide of the printer cover, and replace the cover. B Note When using the take-up spool (using as journal paper): • Insert the end of the paper into the slit in the spool and fold the paper to front side. (Press the (F key to feed more paper if required.) • Wind the paper two or three turns around the spool shaft. • Set the spool on the bearing, and press the (F key to take up excess slack in the paper. • Replace the printer cover. I Note When using a paper roll as journal paper, you must change the printing style. Refer to “Print Format" in “Various Function Selection Programming 1" section (Job code 6) for changing the printing style. Programming date, time and tax B Note The cash register provides text languages of English, French and Spanish. It is preset to English. If you want to change the language, you must change it before programming. Refer to “Language selection" in “Various Function Selection Programming 2" section for changing the language. Before you can proceed with registration of sales, you must program: • date • time • tax Please refer to the BASIC FUNCTION PROGRAMMING section for details (page 29). 9 6 Programming other necessary items While the cash register is pre-programmed so it can be used with minimal setup, it does provide you with optional functions. Before you start programming, please read through the sales operations section to understand optional functions. The main optional functions are listed below. • PLU (price lookup) • Consecutive number • Machine number • Receipt or journal printing selection (factory setting: receipt printing) • Power save mode (factory setting: goes into power save mode in 30 minutes) • Electronic journal (EJ) memory size (factory setting: 1000 lines are storable. Up to 3000 lines) The memory for electronic journal is commonly used for PLU. If you change the setting, the maximum number of PLU code will decrease from 2000 to 200. • Text programming for clerk name, department items, PLU/sub-department items, logo messages printed on the top or bottom of receipts, function texts and foreign currency symbol • Split pricing entry This is not factory preset. You must enable this function. • Foreign currency conversion rate You must set a conversion rate to use V key. • Preset unit price for departments and PLUs • Preset amount for — • Preset rates for % & You do not have to program these preset prices/amount/rates because you can enter during registration. It might be convenient to preset so you do not have to re-enter every time. • Amount entry digit limit for PO amount, RA amount, Manual tax amount The factory setting makes the maximum amount you can enter. You can pr...
Эта инструкция также подходит к моделям:Торговое оборудование - XE-A22S (1.89 mb)