Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Turn the PGM key to the PGM position. 2. Enter the number 3, followed by the k key. 3. Enter 0125 (for tax table 1) followed by the k key. (Enter 0225 for tax table 2) 4. Enter your tax rate, followed by the p key. Example: For 6% enter the number 6. For 5.75%, enter 5.75 5. Enter 5002, followed by the p key. 6. Press the k key to end tax programming. Example: Set Colorado state tax 5.25% Ck?ZXBkB"MBpB??XpkTax status Your cash register is pre-programmed below. a(Department-1) : non tax s(Department-2) : taxable 1 If you need other than this setting for the Department and PLUs, please refer user’s manual page-17. 5 Daily Management Report Read report; Turn the key switch to the X position and press pkey. Reset report; Turn the key switch to the Z position and press p key. For more detailed report information, refer user’s manual. For more specific programming options and operating procedures, that will maximize the benefits of your new cash register, please refer to you user’s manual or call 800/638-9228 for further assistance. Thank you for your Casio purchase. CAL REG OFF RF PGM X Z P appears in mode display Program code number for tax table 1 5.75% tax rate 50 for round off and 02 for Add-on (to end the setting) COLORADO 5.75% 5.75 5002 User’s manual page-16, 35 CAL REG OFF RF PGM X Z ppCAL REG OFF RF PGM X Z IMPORTANT: FOR PROGRAMMING ASSISTANCE PLEASE TOLL FREE 1-800-638-9228 1 Initialize Your Cash Register User’s manual page-9 1. Un-pack your cash register, insert the PGM key and turn to the “OFF” position. CAL X REG Z OFF RF PGM 2. Install the 58mm thermal paper roll as illustrated and close printer cover. 3. Plug the power cord of the ECR into an AC outlet. The initialization receipt is issued. 00-00-2000 00:00 0001 (C) 2003 by CASIO COMPUTER CO.,LTD. All rights reserved. V.3965 INI.••••••••••••••••1 00 CAL X Z REG Set the key switch to “REG” mode. OFF RF PGM 2 Load the memory protection batteries User’s manual page-9 Turn the key switch to “PGM” position. CAL X REG Z Setting the time. OFF Example: 1:18PM = 1318 RF Zk P appears in mode display PGM ZCZ< h • Enter 4 digits/ • 24 hour format Hour y (to end the time setting) Minute Setting the date. Example: March 19, 2004 = 040319 Zk P appears in mode display ?V?CZ> h • Enter 6 digits/ • Enter last 2 digits for year set (2004 > 04) y Year Month Day (to end the date setting) User’s manual page-12,174 Setting Tax rates and status Tax rates A) If you are in an area that uses a tax table for tax calculation, Press the { key and select 02 for tax table programming and follow the instruction. 1. Issue “ Help directory report” . { Select 02 (Tax table programming). ENTER NUMBER THEN PRESS