Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• Increase the separation between the equipment and receiver. • Consult the dealer or an experienced radio/TV technician for help. Important • Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s authority to operate the equipment. Power Supply and Tape Cassette Open the cassette cover by pressing the above indicated area at the top end of the machine. If a tape cassette is already installed, remove it by pulling it straight up. Also, if batteries are already installed, remove them. • Make sure that the power is turned off when replacing batteries or tape cassettes. Insert six new AAA alkaline batteries (LR03:not included) or fully charged Ni- MH batteries (HR03:not included), making sure that their poles point in the correct directions. Users of alkaline batteries: Always replace all six batteries at the same time with brand new ones. Users of Ni-MH batteries: Always replace all six batteries at the same time with fully charged ones. NOTE Visit us at for the latest information about the recommended batteries. Insert a tape cassette, making sure that it snaps into place. • Make sure that the end of the tape feeds under the tape guides. • Use only Brother TZe or HGe tapes with this machine. Securely close the cassette cover, making sure that it snaps into place. NOTE When using the optional AC adapter (AD-24ES) 1. Connect the AC adapter into the AC adapter socket on the bottom of the machine. 2. Insert the plug into the nearest standard electrical outlet. For memory back up, we recommend using AAA alkaline batteries (LR03) or Ni-MH batteries (HR03) together with the AC adapter. 1 Tape cutter lever Cassette cover 2 Print head 3 Toothed wheel Cutter’s edge End of tape Tape Tape guide exit slot 4 AC adapter socket NOTE • The LCD shows one row of 15 characters; however, the text that you enter can be up to 80 characters in length. • While selecting the settings, press the Space key to go back to the default item. LCD Display & Keyboard 18 19 4 5 7 20 9 1 2 3 21 22 12 11 10 14 23 13 24 25 16 17 15 8 6 1. Size 2. Cursor 3. Caps 4. Cable Wrap 5. Faceplate 6. Cable Flag 7. Label Length If a specific label length has been selected, also appears. 8. Guidance (left, right) 9. Power key 10. Cursor key: Right 11. Cursor key: Left 12. Backspace key 13. Cable Wrap key 14. Cable Flag key 15. Character keys 16. Caps key 17. Symbol key 18. Menu key 19. Clear key 20. Print key 21. Enter key 22. Serialize key 23. Faceplate key 24. Accent key 25. Space key • The print preview shows just the text data on the label and will differ from the actual printed label. • Label length shown on LCD may slightly differ from the actual label length when printed. 1 Start your machine. Supply power by using six AAA batteries, and then press . 2 Set the language. 3 Set the unit of measurement. The default setting is [inch]. NOTE • The machine automatically turns off if no keys are pressed within five minutes. • To cancel any operation, press . Initial Settings / [Language] / [English/Espanol/Francais/Hrvatski/Italiano/Magyar/ Nederlands/Norsk/Polski/Portugues/Portug. (BR)/ Romana/Slovenski/Slovensky/Suomi/Svenska/Turkce/ Cestina/Dansk/Deutsch] . / [Unit] / [inch/mm] . Troubleshooting .. Error message .. What to do when... Message Cause/Remedy Low Battery! • The batteries are weak. • If using AAA alkaline batteries: Replace them with new ones. • If using Ni-MH batteries: Charge them fully. • Use recommended (optional) AD-24ES adapter until the battery issue is resolved. Battery Dead The installed batteries are running low. Invalid! • An invalid number was entered as the label length, tab length, cable diameter, flag length or faceplate length. • An invalid letter or number to be incremented was selected in the Serialize function. No Data! • You tried to print a text file when there is no data stored in the memory. • or was pressed when no text is entered. • You tried to select Text Preview when no text is entered. Line Limit! • You tried to enter a 3rd line by pressing . • You tried to print or preview two lines of text while 0.13" (3.5mm) or 0.23" (6 mm) tape is installed. Install tape of a larger size. No Cassette! You tried to print or preview a label when there is no cassette installed. Cutter Error The tape cutter lever was used during the printing process. Text Full! The maximum number of characters (80 characters for regular text) has already been entered. Text Limit! Since the number of entered characters exceeds the label length, reduce the text, or select [Auto] as the label length. No Frame OK? Printing on 0.13" (3.5mm) tape with invalid Frame setting ON. (Select to print with no Frame, to cancel.) OK to Feed? Feeding tape after printing when [Chain Print] is selected. Refer to “Setting Margin”. Wrong Tape! Use a tape cassette with the or mark. Message Cause/Remedy Problem Solution The display stays blank after you have turned on the machine. • Check that the ba...