Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
• Do not use the P-touch labeler in places of high humidity such as bathrooms. • Do not allow the P-touch labeler/batteries to get wet, for example, by handling them with wet hands or spilling beverages on to them. • Since loss of eyesight may result when leaked fluid from batteries gets into your eyes, immediately rinse your eyes with a large amount of clean water, and then seek medical attention. • Do not disassemble or modify the P-touch labeler/batteries. • Do not allow a metal object to contact both the plus and minus ends of a battery. • Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries. • Do not throw the batteries into fire or expose to heat. • Remove batteries immediately and stop using the P-touch labeler if you notice abnormal odor, heat, discoloration, deformation or anything unusual while using or storing it. • Do not use a damaged or leaking battery as the fluid may get on your hands. • Do not use a deformed or leaking battery or one whose label is damaged. There is a possibility of generating heat. Follow these guidelines to avoid personal injury, liquid leakage, burns or heat. • When the P-touch labeler is not being used, store it out of the reach of children. In addition, do not allow children to put the P-touch labeler parts or labels in their mouths. If any object has been swallowed, seek medical attention. • Do not touch metal parts around the print head immediately after printing. • Do not touch the cutter blade. • If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with clean water. • Remove the batteries if you do not intend to use the P-touch labeler. • Do not use a battery other than that specified. Do not use combinations of old and new batteries or combinations of different types, different charging levels, different manufacturers or different models. Do not insert a battery with its plus and minus ends reversed. • Do not drop or hit the P-touch labeler. • Do not press on the LCD display. • Do not put your finger inside the P-touch labeler when you close the cassette cover. • Before using Ni-MH rechargeable batteries, carefully read the instructions for the batteries and battery charger, and be sure to use them correctly. • When using Ni-MH rechargeable batteries, charge the batteries with a specialized battery charger before using the batteries. • Depending on the location, material, and environmental conditions, the label may unpeel or become irremovable, the color of the label may change or be transferred to other objects. Before applying the label, check the environmental conditions and the material. • Do not use the P-touch labeler in any way or for any purpose not described in this guide. Doing so may result in accidents or damage the P-touch labeler. • Use only Brother TZe tapes with the P-touch labeler. Do not use tapes that do not have the mark. • Only use a soft, dry cloth to clean the labeler; never use alcohol or other organic solvents. • Use a soft wipe to clean the print head; never touch the print head. • Do not put any foreign objects into the tape exit slot or battery compartment, etc. • Do not place the P-touch labeler/batteries in direct sunlight or rain, near heaters or other hot appliances, in any location exposed to extremely high or low temperatures (e.g., on the dashboard or in the back of your car) or high humidity, or in dusty locations. • Do not apply excessive pressure to the cutter lever. • Do not try to print if the cassette is empty; it will damage the print head. • Do not pull the tape while printing or feeding; it will damage the tape and the P-touch labeler. • Any data stored in memory will be lost due to failure or repair of the P-touch labeler, or if the battery expires. • The P-touch labeler is not equipped with a charging feature for rechargeable batteries. • The length of the printed label may differ from the displayed label length. • A protective clear plastic sticker is placed over the display during manufacturing and shipping. This sticker should be removed prior to use. • When power is disconnected for more than three minutes, all text, format settings and any text files stored in the memory will be cleared. Safety Precautions Indicates a potentially hazardous situation which, if not avoided, could result in serious injuries. WARNING Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries. General Precautions CAUTION FCC NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in ...