Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Торговое оборудование - PT-H300 (10.98 mb)
Торговое оборудование - PT-H300 (11.44 mb)
Фрагмент инструкции
Setting Description Example ABC ABC *Feed the tape before using the cutter. 0.37" (9.5 mm) Adjusting the Label Length 1 2 3 • Press the Escape key to return to the previous step. • Press the Space key to set the value to default setting. • Approximately 1% of the total label length will be adjusted by 1 level. Attaching Labels 1 2 3 LABEL PRINTING • The backing of some types of tapes may be pre-cut to make it easier to peel the backing.To remove the backing, simply fold the label lengthwise with the text facing inward, to expose the inside edges of thebacking. Next, peel off the backing one piece at a time. • Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel off easilyfrom these surfaces. • Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive Tapes orother special tapes and observe all precautions noted in the instructions. • Please use scissors to cut heat shrink tube tape. Printing from the Label Collection Printing a label from the Label Collection Stored in the Machine Pages 53 shows the many labels that are stored in your Label Collection. Printing these pre- designed labels saves you time. 1 Press the Label Collection key. 2 Select the language of the label to be printed using the or key, and then press the OK or Enter key. The language can be selected from "Croatian", "Czech", "Danish", "Dutch", "English(United Kingdom)", "English(United States)", "Finnish", "French", "French(Canada)", "German", "Hungarian", "Italian", "Norwegian", "Polish", "Portuguese", "Portuguese(Brazil)", "Romanian", "Slovak", "Slovenian", "Spanish(Spain)", "Spanish(United States)", "Swedish" or "Turkish". 3 Select the category using the or key, and then press the OK or Enter key. Refer to the Label Collection List to view all of the available labels. 4 The first label image is displayed. Select a label using the or key, and then press the OK or Enter key. To add the label to your "Favorites", select "Add to Favorites" using the or key, and then press the OK or Enter key to register the selected label image in the Favorites category. Registering your most frequently used label images allows you to quickly and easily display them when needed again. 5 Select "Print" using the or key, and then press the OK or Enter key. Only 0.47" (12mm) or 0.70" (18mm) tape can be used for Label Collection. 6 Select the number of copies to be printed using the or key, or type the number using the number keys. 7 Press the OK or Enter key to print the labels. "Printing...Copies" is displayed while the labels are being printed. 52 Printing from the Label Collection 1 2 3 4 5 6 7 8 9 53 .. LABEL PRINTING Printing from the Label Collection ..Label Collection List.. Category Label Files Office Signage Communication Attention Retail * Labels are for illustrative purposes only. USING THE FILE MEMORY You can store up to 50 of your most frequently used labels in the file memory. Each label is stored as a file, allowing you to quickly and easily recall your label when needed again. When the file memory is full, each time you save a file you will need to overwrite one of your stored files. Storing a Label into Memory 1 After entering the text and formatting the label, press the File key to display the File screen. 2 Select "Save" using the or key. 3 Press the OK or Enter key. A file number is displayed. A label text is also displayed if a label is already stored in that file number. 4 Select a file number using the or key, and then press the OK or Enter key to save the label under the selected file number. The file is saved and the screen returns to the text entry screen. When there is already a stored file in the selected number, the data will be overwritten by the file you try to save. • Press the Escape key to return to the previous step. • Up to 200 characters can be saved in one file. However, the number of characters that can be saved may differ, for example when entering symbols. • To store a label created by using the Auto-Format Layouts, refer to “Using Auto-Format Layouts” on page 38. Opening a Stored Label File 1 Press the File key to display the File screen. 2 Select "Open" using the or key. 3 Press the OK or Enter key. The file number of a stored label is displayed. The label text is also displayed to identify the label. 4 Select a file number using the or key, and then press the OK or Enter key to open the selected file. The file is opened and displayed on the text entry screen. 54 Press the Escape key to return to the previous step. Storing a Label into Memory 1 2 3 4 5 6 7 8 9 55 .. USING THE FILE MEMORY Printing a Stored Label File Press the File key to display the File screen. Select "Print" using the or key. Press the OK or Enter key. The file number of a stored label is displayed. The label text is also displayed to identify the label. Select a file number using the or key, and then press the Print, OK or Enter key to display the Copies screen. Select t...