Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Here's how: 1 Check current preset From the Ready screen, • Press the Normal Preset key. If the screen shows “Class: None”: OR Proceed to step 2 below. If the screen shows a postal class (for example, “Class: 1stReg Letter”): xxx.xx.xxxx $X.XX Class: 1stReg Letter Ready to Print Stop here! There is nothing else you need to do! 2 Choose a class • Press the Class key. • Make sure to have Use attached scale or Enter manual weight selected before selecting Change Class. • Select Change Class. • Set up a class of mail (for example, select 1st Class Reg, followed by Letter). • Confirm that the screen now shows the correct class (in this example, it should read “Class: 1stReg Letter” and “0.44”). New rate shown below will appear on May 11,2009 $0.44 0 lb 1.0 oz May 11.2009 Class: IstReg Letter _Ready to Print_ 3 4 Set up preset • Press the Options key. • Select Setup Menu. • Select Preset- normal/custom. • Select Store Current Settings. • Select Normal Preset. • Press the Enter key. CONGRATULATIONS! When the system returns to the Ready screen, your normal preset has been updated. From now on, your normal preset will automatically update when the rates change. You’ll never need to do it again! New rate shown below will appear on May 11,2009 $0.44 0 lb 1.0 oz May 11.2009 Class: 1stReg Letter _Ready to Print_ For additional assistance with your rates update, visit or call 1-800-962-4088. AW21379 Rev C. © 2009 Pitney Bowes Inc. All Rights Reserved Printed in U.S.A....
Эта инструкция также подходит к моделям:Торговое оборудование - DM300ITM (19.2 kb)
Торговое оборудование - DM300LTM (19.2 kb)
Торговое оборудование - DM400LTM (19.2 kb)