Оценок - 3, средний балл: 4 ( )

Производитель: Toshiba Размер: 1.18 mb Название файла: Язык инструкции:

Thus, near the sale finalization, the operator may read the SI content by depressing the [SI/TL] key. A preset % rate may be programmed for each of SI1 and SI2 (on the preceding page), and whether the calculated amount will add to, subtract from, or non-affect the sale total is a selective option. Whether the amount resulted by depressing the [Sl/TL] key will print or non-print is another selective option. The applications of this function may vary from store to store. Some stores may use it for counting the service stamps to be issued to the customers according to the sale amount of service-stampable items. In this case, the option “SI Total Non-affects Sale Total” should be selected, and a preset % rate, 1% for example, may be set to issue one service stamp for every $1.00. Thus the number of stamps to be issued to the customer is displayed (and printed if so programmed) as a result of calculation with the preset % rate, but the resulted value (the number of stamps in this case) will not affect the sale total. Example 1) With option “SI Total Non-affects Sale Total”: Key Operation in REG Mode Receipt/Journal Print 100 [DEPT 1] (SI-net) 150 [DEPT 2] (non-SI) 200 [DEPT 3] (SI-net) "S": SI-net Symbol [SI/TL] (1% is preset) D P 01 1.00 S D P 02 1.50 [AT/TL] D P 03 2.00 S Number of stamps to SI TL 0.03 be issued. CASH 4 . 5 0 Dept.1 and Dept. 3 are programmed with SI-net-status. On depressing [SI/TL], “0.03” (which is 1 % of total amount of Dept. 1 “1.00” + Dept. 3 “2.00”) is displayed and printed, and 3 stamps are to be issued to the customer in this case. The sale total “4.50” is not affected by the SI calculation. Other stores may use it for calculating the discount amount for certain sales items during a special discount sales period by presetting the discount % rate on the SI and programming SI-net status to certain Departments and PLUs which are subject to the special discount. Example 2) With option “SI Special Discount”: Key Operation in REG Mode Receipt/Journal Print 100 [DEPT 1] (SI-net) 150 [DEPT 2] (non-SI) D P 01 1.00 S 200 [DEPT 3] (SI-net) D P 02 1.50 [SI/TL] (10% is preset) D P 03 2.00 S [AT/TL] SI TL -0.30 CASH 4 . 2 0 Discount Amount resulted by SI % On depressing [SI/TL], “-0.30” (which is 10% discount from the total amount of Dept.1 + Dept. 3 items) is displayed and printed, and that amount is subtracted from the sale total. (4.50 - 0.30 = 4.20) – 69 – EO1-11113 FOREIGN CURRENCY EXCHANGE RATE SETTING In this program, the rate of each foreign currencies (corresponding to the [CUR1] to [CUR5] keys) will be set. By setting a rate on each Foreign Currency Key, reading the sale total and tendering in the foreign currency value will be possible for sale finalization. OPERATION CONDITION Any time outside a sale Mode Lock: SET | Exchange Rate for Foreign Currency 1 | 0.000001 to 9999.999999 [CUR1] (Use the [ . ] key if decimal portion is contained in the rate.) . . . . . . . . . . . | Exchange Rate for Foreign Currency 5 | [CUR5] As for how to calculate the Exchange Rate, see the description below. Foreign Currency Exchange Rate Calculation 1. The rate must be calculated in the subsidiary currency unit values for both the domestic and the foreign currencies. (In calculating the rate from the domestic to a foreign currency with the same zero-suppress form, such as from U.S. $ to French Franc. it will be no problem even if it is calculated in the main currency of $ and Franc. However, in case of exchanging from a domestic currency such as $ or Franc to Japanese yen or Italian Lira, or vice versa, this rule must be obeyed; otherwise a wrong rate will result.) 2. Calculate the required foreign currency value equivalent to the domestic currency value “1”. Then the obtained value is the Exchange Rate value to be entered in the setting operation stated above. For example, if the domestic currency is U.S. $: 1. = xxxx.xxxxxx centimes (French Franc) = xxxx.xxxxxx pfennings (Deutsche Mark) = xxxx.xxxxxx yen (Japaneses yen) etc. Enter this value as each foreign currency rate. – 70 – EO1-11113 ex.) To set three foreign currency rates: Domestic Currency ....... U.S. $ Assigning: [CUR 1] ..... French Franc [CUR 2] ..... Deutsche Mark [CUR 3] ..... Japanese yen Conditions given for Domestic Currency and Foreign Currencies (The rates here are merely examples.) (DOMESTIC) (CUR1) (CUR2) (CUR3) U.S. Dollar French Deutsche Japanese Franc Mark Yen $1.00 = F5.3729= DM1.7619 = (145.50)... In Main Currency Values 1 cent= 5.3729= 1.7619= 1.4550... In Subsidiary centimes pfennigs yen Currency Values (Enter these values for setting.) TEC STORE 1343 PEACH DRIVE KEY OPERATION for setting the rates above: PHONE : 87-6437 Open 8:00am to 7:00pm Mode Lock: SET Closed : every Wednesday 5 [ . ] 3729 [CUR1] (for French Franc) 12-19-1994 MON #1 1 [ . ] 7619 [CUR2] (for Deutsche Mark) P 0 0 1 [ . ] 4550 [CUR3] (for Japanese yen) CUR1 5.3729 * 0046 Resetting a Foreign Currency Rate Once Set: 12-19-1994 MON #1 Enter "0" in place of the E...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: