Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which cause the user at his own expense will required to take whatever measures may be required to correct the interference. TEC ELECTRONIC CASH REGISTER MA-191-100 SERIES Owners Manual TABLE OF CONTENTS page TO OUR CUSTOMERS ....................................................... 1 PRECAUTIONS ............................................................. 1 APPEARANCE AND NOMENCLATURE ......................................... 1 CONTROL LOCKS AND MODE SELECTOR KEYS ............................... 2 DISPLAY .................................................................. 4 KEYBOARD LAYOUT ........................................................ 5 FUNCTION OF EACH KEY .................................................. 7 OTHER OPTIONAL KEYS ....................................................19 REGISTERING PROCEDURE FOR SALES ...................................... 21 READ(X) AND RESET(Z) REPORT ........................................... 34 PROGRAMMING OF THE REGISTER ..........................................48 VERIFICATION OF PROGRAMMED DATA .....................................61 INSTALLING AND REMOVING THE RECEIPT PAPER ROLL ....................64 INSTALLING AND REMOVING THE JOURNAL PAPER ROLL .................... 64 WHEN A POWER FAILURE OCCURS ..........................................65 OPENING AND REMOVING THE DRAWER ..................................... 65 REPLACING THE INK ROLLER ..............................................65 REPLENISHING INK ........................................................66 SPECIFICATIONS ........................................................... 66 BEFORE CALLING FOR SERVICE ............................................ 66 TO OUR CUSTOMERS Thank you for choosing a TEC electronic cash register MA-191-1D0 series. This instruction manual provides a description of the functions and handling of this register and should be read carefully to obtain maximum performance. Since every consideration has been given to safety, there is no danger of damaging the machine by incorrect operation. Please refer to this manual whenever you have any doubts concerning the machine. This machine has been manufactured under strict quality control and should give you full satisfaction. However, if the machine is damaged during transit, or there are any unclear points in this manual, please contact your TEC representative listed in this booklet. | The specifications described in this manual may be modified by TEC, if necessary. | Be sure to keep this manual for future reference. PRECAUTIONS 1. The keys on the keyboard work with a light touch. Avoid pressing the keys too hard. 2. Avoid handling the machine with wet hands. 3. Do not apply thinner or other volatile oils to the cabinet or other plastic parts. If the dirt is very bad, wipe off with a piece of cloth soaked in neutral detergent and squeezed tightly. APPEARANCE AND NOMENCLATURE Paper Cover-Paper Cover Lock Printed Journal Receipt Outlet Slip Inlet Cash Drawer Display Cashier Lock GT Lock Control Lock Keyboard Power Switch Drawer Release Lock 8 Power Switch ... The power switch is provided at the righthand side of the cabinet. The AC power is turned on when the switch is pushed to ON, and turned off when the switch is pushed to OFF. - 1 - These locks are used to identify which clerk is operating the register. CLERK KEYS (CL 1, CL 2, CL 3, CL 4) Each clerk should keep his/her clerk key. The register will not operate unless one of these keys is inserted and set to the corresponding position on the Clerk Locks. Each of the keys may be inserted and pulled out in the neutral position marked with the (point). NOTES: 1. The push-style Clerk Keys may be installed in place of the Clerk Locks. In that case, four Clerk Keys will be installed as the standard feauture, and nine Clerk Keys as an optional feature. 2. The Clerk Locks or push-style Clerk Keys may be used as Major Group Keys if so programmed in the system option. This lock is provided to read or reset the accumulated sales totals not on the daily but on weekly or monthly basis. GTX Position: This positition allows to read the accumulated totals. The GTX Key and GT2 Key can access this position. GT2 Position: This position allows to read and reset the accumulated totals. The GT2 Key can access this position. NOTE: When the GT Lock is turned to either the GTX or GTZ position, the Mode Lock position and any Clerk Key ON/OFF condition will be disregarded. REG (-) Lights up when sale items have been entered into a department. SI TXBL ST TL CG SHORT TRF Lights up when the 1RTN MDSE] , ¡DOLL DISC] ,...
Эта инструкция также подходит к моделям:Торговое оборудование - MA-191-100 (1.27 mb)