Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
. . . . . . . . . . . . . . . . . . .1 Making Basic TV Connections Basic Cable TVConnections . . . . . . . . . . . . . . . . . .1 Basic Antenna TVConnections . . . . . . . . . . . . . . . .1 Basic TV Operation . . . . . . . . . . . . . . . . . . . . . . . . . .2 Remote Battery Installation . . . . . . . . . . . . . . . . . . .2 Remote Control Button Descriptions . . . . . . . . . . . .2 How to Use the Installation Features . . . . . . . . . . .3-4 Using the Onscreen menu . . . . . . . . . . . . . . . . . . . . .3 Using the Language Control . . . . . . . . . . . . . . . . . . .3 Setting the Tuner Mode Control . . . . . . . . . . . . . . . .3 How to Automatically Program Channels . . . . . . . . .3 How to Add and Delete Channels . . . . . . . . . . . . . . .4 Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 IMPORTANT NOTE: This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require that you contact your dealer or request service. WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE. BASIC TV CONNECTIONS CABLE TV Y Y our Cable TV input into your home may be a single (75 ohm) cable or a converter box installation. In either case, the connection to the TV is very easy. Follow the steps below to connect your cable signal to your new television. If your cable signal comes directly from a round 75. coaxial cable use the following steps: 1 1 Connect the open end of the round Cable Company supplied cable to the 75. input on the TV. Screw it down finger tight. 2 2 Plug the television in to the wall outlet and turn the TV on. Refer to the AUTO PROGRAM feature to program all the available channels on your cable signal. If your cable signal comes from a cable box, use the following steps: 3 3 Connect the open end of the round Cable Company supplied cable to the cable signal IN(put) plug on the back of the Cable Box. 4 4 Using a separate round coaxial cable, connect one end to the OUT(put) plug on the back of the Cable Box. 5 5 Connect the other end of the round coaxial cable to the 75. input on the back of the television. Screw it down finger tight. 6 6 Plug the television in to the wall outlet and turn the TV on. Refer to the TUNER and AUTO PROGRAM features on page 3 of this Quick Use Guide. TUNER should be set to the CABLE option. AUTO PROGRAM can be set to program all the available channels on your cable signal into the television’s memory. Direct Cable Connection: Cable signal coming from Cable Company (Round 75.coaxial cable) Jack Panel Back of TV AC Power Wall Outlet Power Plug from back of TV Cable Box Connection: Jack Panel Back of Cable Box Cable Signal IN from the Cable Company Round 75.Coaxial Cable Jack Panel Back of TV AC Power Wall Outlet Power Plug from back of TV NOTE: If your cable box uses separate Audio Outputs, the connection will have to be made at the TV’s Audio L & R AV in jacks. ANTENNA TV A A combination antenna receives normal broadcast channels (VHF 2–13 and UHF 14–69). Your connection is easy because there is only one 75. (ohm) antenna plug on the back of your TV, and that’s where the antenna goes. 1 1 If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV. If your antenna has flat, twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300- to 75-ohm adapter. 2 2 Push the round end of the adapter (or antenna) onto the 75. (ohm) plug on the back of the TV. If the round end of the antenna wire is threaded, screw it down finger tight. 3 3 Plug the television in to the wall outlet and turn the TV on. Refer to the TUNER and AUTO PROGRAM features on page 3 of this Quick Use Guide. TUNER should be set to the ANTENNA option. AUTO PROGRAM can be set to program all the available channels on your cable signal into the television’s memory. Antenna Connection: Jack Panel Back of TV Power Plug from back of TV AC Power Wall Outlet Round 75.Coaxial Cable from Antenna Twin Lead Wire 300 to 75-ohm Adapter Outdoor or Indoor Antenna (Combination VHF/UHF) The combination antenna receives normal broadcast channels 2-13 (VHF) and 14-69 (UHF). 3121 233 42852 BASIC TV AND REMOTE OPERATION TELEVISION Y Y our television has a set of controls located on the top of the cabinet for use when the remote control is not needed. 1 1 Press the POWER button to turn the TV ON. 2 2 Press the VOL (+) button to increase the sound level or the VOL (–) button to lower the sound level. Pressing both buttons at the same time will display the onscreen menu. After you are in the menu, use these buttons to make adjustments or selections. 3 3 Press the CH – (down) or + (up) button to select TV channels. Use these buttons to make adjustments or selections in the onscreen menu. There is also a set of Audio and Video Input jacks located on th...