Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
. . . . . . . . . . . . . . .1 Balance postale numerique DYMO . . . . . . . . .7 The scale uses three AAA alkaline batteries. The scale automatically turns off after three minutes of inactivity. To insert the battery 1. Turn the scale over. 2. Remove the battery compartment cover. 3. Insert three AAA batteries as shown. ! Make sure to insert the batteries correctly. Inserting the batteries backwards can damage the scale. 4. Replace battery compartment cover. ! Remove the batteries if the scale will not be used for a long period of time. Turning On the Power The scale has an Auto Shut Off feature which automatically turns off the scale after three minutes of inactivity. To turn the scale on ¦ Press on the front of the scale. When the scale is first turned on, wait a few seconds for the scale to stabilize before weighing items. The display shows 0.0 or 0.00 when ready. To turn the scale off ¦ Press on the front of the scale to turn the scale off. The scale turns off automatically after three minutes of inactivity. 0.0TAREkg lb0.0TARE kg lb HOLD DYMO® Digital Postal Scale This User Guide provides instructions for using your DYMO® Digital Postal Scale. Power Visit to register your scale. Setting Up the Scale The scale is powered by three AAA batteries (included). To set up the scale 1. Unpack the scale. Tare/ Zero LCD display Kg/Lb Hold 2. Set the scale on a firm, flat surface. Inserting the Batteries AAAAAAAAA Using the Scale Always wait for 0.0 or 0.00 to display before placing an item on the scale platform. After placing an item on the scale, wait for several seconds for the weight to appear. When the scale is ready, a o appears to the left of the weight. To weigh an item ¦ Place an item on the scale platform. Using the Tare Feature You can weigh small items or items that cannot be easily placed on the scale platform by placing the items in a container and using the Tare/Zero button to eliminate the weight of the container. To use the tare feature 1. Place an empty container on the platform. 2. When the scale is ready, press The display is set to zero. 3. Place the items to be weighed in the container. The display shows the weight of the items, without the weight of the container. 4. After removing the container, press 0.0TARE to reset the scale to zero. Using the Hold Feature When an item being weighed extends over the front of the scale and you cannot see the display, you can freeze the display so that the weight is still displayed after removing the item. To use the Hold feature . 0.0TARE 1. Press .HOLD The display shows HOLD and then 0.0 or 0.00 when ready. 2. Place the item on the scale. 3. After a few seconds, remove the item from the scale. The weight continues to be displayed for about ten seconds. Changing the Units of Measure Your scale can display weight in English (pounds) or metric (kilograms) units. The default unit of measure is English. Each time you turn on the scale, the scale defaults to the unit of measure that was last used. To change the units of measure ¦ Press kg lb to toggle between English and metric units. Caring for the Scale With proper care and handling, your scale will give you years of service. Keep the following in mind when using your scale: • Your scale works best when operated and stored at normal room temperature. Avoid lengthy exposure to extreme heat or cold. • Only operate the scale on a stable, vibration free surface. • Exposure to dust, dirt, moisture, vibration, and air currents; and proximity to other electronic equipment can affect the reliability and accuracy of your scale. • Using the scale in proximity to wireless devices, such as mobile phones, can cause the scale display to fluctuate when the device is in use. • Although this scale is designed to be quite durable, gently place items to be weighed on the platform. Avoid rough treatment, as this may permanently damage the internal sensor and void your warranty. • You can permanently damage the scale by placing significantly overweight items on the scale platform. • Avoid shaking, dropping, or otherwise shocking the scale. This is a precision instrument and MUST BE HANDLED WITH EXTREME CARE. • The scale has been calibrated at the factory and will not need to be calibrated again. Technical Specifications NOT LEGAL FOR TRADE Model M3 M5 Capacity 3 pounds (1.3 kg) 5 pounds (2.2 kg) Weight Increments 0.05 oz (1 g) 0.1 oz (1 g) Accuracy Under half the capacity ±0.1 oz ±0.1 oz Over half the capacity ±0.2 oz ±0.2 oz Units lb/oz (kg/g) lb/oz (kg/g) Auto Shut Off After three minutes of inactivity Operating Temperature 50° - 104° F (10° - 40° C) Power 3 AAA alkaline batteries For information about our other scale products, visit Troubleshooting Problem/Error Message Solution No display Replace the batteries. LO is displayed Replace the batteries. Negative number is displayed A tare value is displayed as a negative number when the items 0.0TARE are removed from the scale. Press to reset ...
Эта инструкция также подходит к моделям:Торговое оборудование - M5 (6.53 mb)