Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
6. T8602C key locations and descriptions. SETTINGS System and Fan Settings The system default setting is Heat and the fan default setting is Auto. Use the System and Fan keys to change the settings. See Fig. 7. The fan settings can be set for each program period individually. The system selection is for all the program periods. System settings control the thermostat operation as follows: Heat: The thermostat controls the heating. Off: Both the heating and cooling are off. Cool: The thermostat controls the cooling. Fan settings control the system fan as follows: On: Fan operates continuously. Fig. 7. Thermostat System and Fan key locations. Auto: Fan operates with equipment. NOTE: Always press the keys with your fingertip or similar blunt tool. Sharp instruments like a pen or pencil point can damage the keyboard. M14625 Hold T mp Run Program CopDaylight Time Set Current Day/Time System Fan Time Set Program Day System Fan Wake Leave Return Sleep Heat/Cool Settings 69-1567 4 T8602C CHRONOTHERMT8602C CHRONOTHERMIV DELUXE PROGRAMMABLE THERMOSTATS Temperature Settings Refer to Table 2 for the default program. If the daytime energy savings period is not used, press the period key (Leave or Return) until the time is blank. The fan setting feature is available on select thermostat models. See Owners Guide, form number 69-0940, for complete instructions on changing the program. Table 2. Default Program Settings. Period Time Heat Setpoint Cool Setpoint Fan Setting Wake 6:45 AM 20°C 25°C Auto Leave 8:45 AM 4.5°C 37°C Auto Return 5:00 PM 20°C 25°C Auto Sleep 10:00 PM 4.5°C 37°C Auto INSTALLER SETUP NOTE: For most applications, the thermostat factory- settings will not need to be changed. Review the factory settings in Table 2 and if no changes are necessary, go to the Installer Self- Test section. The Installer Setup is used to customize the thermostat to specific systems. Some of the options include temperature display, system changeover and outdoor temperature display. Installer Setup numbers are listed in Table 3. The table includes all the configuration options and the factory-settings for the T8602. A combination of key presses are required to use the Installer Setup feature. — To enter the installer setup, press and hold the information i key with the increase and decrease keys until the first number is displayed. All display segments appear for approximately three seconds before the number is displayed. See Fig. 8 and 9. — To advance to the next Installer Setup, press the Time key. — To change a setting, use the increase or decrease key. — To scroll the Installer Setup numbers backwards, press the Time key. — To exit the Installer Setup, press Run Program. M14559 Aux Ht Set Day/TimeSet Program Mon Wake Leave Return Sleep OutdoorRoom Filter Wait System Fan Em Heat On Auto Off Cool Auto AM PMHold for Heat Cool Repl Batt Recovery DST Tue Wed Thu Fri Sat Sun Days Temporary Setting Em Ht INSTALLER SETUP NUMBER DISPLAY (COLUMN 2 OF TABLE 3) FACTORY SETTING OR OTHER CHOICE DISPLAY (COLUMN 3 OR 5 OF TABLE 3) Fig. 8. Display of all the segments of the LCD. M14618 Fig. 9. Display of Installer Setup number and setting. CAUTION Electric heat systems must be configured to 1 in Installer Setup number 2 to prevent equipment damage caused by the system running without the fan. IMPORTANT Only configurable numbers are shown on the device. Example: If thermostat does not have a system key, Installer Setup Number 12 will not be displayed. Review Table 3 factory-settings and mark any desired changes in the Actual Setting column. When Installer Setup is complete, review the settings to confirm that they match the system. 5 69-1567 T8602C CHRONOTHERMT8602C CHRONOTHERMIV DELUXE PROGRAMMABLE THERMOSTATS Table 3. Thermostat Installer Setup Options. Select Installer Setup Number (Press Time key to change) Factory-Setting Other Choices (Press or key to change) Actual SettingDisplay Description Display Description Not used. 1 — — — — — Fan operationa . 2 0 Conventional applications where equipment controls fan operation in heat mode. 1 Heat pump or electric heat applications where thermostat controls fan operation in heat mode. Not used. 3 — — — — — Heating cycle rate. 4 6 6—6 cph used for conventional heat. 1, 3 or 9 1—1 cph used for radiant floor heat, gravity system. 3—3 cph used for hot water systems or high efficiency furnaces. 9—9 cph used for electric heat systems. Not used. 5 thru 12 — — — — — Adaptive Intelligent Recovery™ control. 13 1 Conventional recovery (system starts recovery at programmed time). 0 Adaptive Intelligent Recovery™ control is activated (system starts early so setpoint is reached by start of program period). — Not used. 14 and 15 — — — — — Clock format. 16 0 12-hour clock format. 1 24-hour clock format. Not used. 17 thru 23 — — — — — Outdoor temperature display (select models). 24 0 No outdoor temperature is displayed. 1 Outdoor temperature is displayed. Needs a C7089B1000 Outdoor Sensor to operate. Not u...