Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
SET THERMOSTAT TO MODE “OFF” PRIOR TO CHANGING SETTINGS IN SETUP OR RESTORING FACTORY DEFAULTS. Residential Light Commercial Systems Carrier Corporation 4/01 TSTATBBPS101 Page 1 Front Panel Front Panel 67 70 HEAT COOL AUTO o oAm 6:0368 Su Backlit LCD Display Warmer or + Button Cooler or - Button Mode Button Heat or Cool Indicator Red = Heat, Green = Cool 67 70 HEAT COOL AUTO o oAm 6:0368 S SET CLOCKPROGRAMVACATION OUTSIDEFAN MODE Programmable Thermostat FAN OUTSIDE VACATION PROGRAM SET CLOCK Page 2 Display Display 1 Mode Indicators1 1 1 1 2 3 4 4 7 6 8 10 11 9 88 88 HEAT COOL OFF AUTO Fan On Program ServiceFilter Locked Setup On Start o o Am Pm 12:0088 SMTWTFS : 5Outside Day Night EveningMorning 2 4 3 Selects the operation mode of the equipment. HEAT - indicates the heat mode. COOL - indicates the air conditioning mode. AUTO - indicates the system will automatically changeover between heat and cool modes as the temperature varies. OFF - indicates the entire system is turned off. PROGRAM ON - indicates the stored program is enabled to run. Page 8. Clock with Day of the Week Indicates the current time and day. This clock is also used to program the timer periods. Page 5. Room Temperature Display Indicates the current room temperature. Desired Set Temperature Indicates desired room temperature(s). Page 7. Page 3 5 Outside Indication Indicates the temperature displayed is fromthe optional outside sensor. Page 21. Morning, Day, Evening & Night Indication Indicates the program time period. Page 8-11. Setup Indication Indicates the thermostat is in the programmingmode. Page 12. Fan Operation IndicationFan On -indicates constant, continuous fan operation. When Fan On is not lit -indicates the fan will only operate when necessary to heat orto cool. Page 7. Service Filter Indication Service Filter indicates when the filter should be serviced under normal conditions. Appears after 0 -1950 hours of bloweroperation (adjustable). Page 15. Locked Indication Locked appears after the right combination ofbuttons are pressed, rendering the buttons inoperative. Page 22. Start Indication Start appears when programmingtimer functions. Page 8. Display Display Quick Start Set the Clock and Go Quick Start Set the Clock and Go Am12:00: During Setup & Programming: SET CLOCK Press the SET CLOCK Pressing the Up and Down button. buttons will modify the flashing selection. . Setup (Represented in dark black) i To adjust the Press clock or Day use MODE Setup 2 S buttons. Press the SET CLOCK SET CLOCK button as above to return to normal operation. This thermostat is preprogrammed from thefactory to operate 1 or 2 Stage equipment withoutthe need for further programming. To optimize theinstallation of this thermostat follow the instructions in the Advanced Setup section. Page 5 Basic Operation Basic Operation Select Mode : 12:00Pm M The HEAT setting indicates the temperature the room has to reach before the furnace will HEAT o Press 69 69 MODE turn on to heat the room. 70 12:00Pm The COOL setting indicates the : 72 o M 70 COOL temperature the room has to reach before the air conditioner will turn on to cool the room. Press MODE 12:00Pm : 72 o AUTO will automatically select M 70 COOL heat or cool based on room AUTO temperature demand. HEAT o Press 69 69 MODE ProgramOn o 12:00Pm Program On will activate the M : 73 COOL stored timer operation. (Morning, Day, Evening HEAT & Night Periods) o 70 Day70 Press MODE : 12:00Pm OFF indicates both heating M and air conditioning systems are turned off. OFF 70 Page 6 Basic Operation Basic Operation Select Desired Temperature In any mode, adjust the desired Set Temperature : :: 72 o with 12 00Pm M 70 COOL AUTO HEAT 69 o buttons. Pressing the Up or Down buttons in Auto mode will adjust both the heat and cool set temperatures simultaneously. Pressing the Up or Down buttons in Heat or Cool modes will adjust only the heat or cool set temperature. Fan Press FAN Operation 12:00Pm : 85 o S 65 65 COOL Fan On indicates constant fan operation. This feature is active even if the thermostat HEAT is set to Off. Fan On 55 o Page 7 Programming 4 Time Periods Programming 4 Time Periods Press PROGRAM Press the PROGRAM button to enter time period programming. Use the back cover Programming Worksheet to help with this section. M Select the day of week (M - S) Press MODE : Start 7 30 Am M Morning Adjust the start time for Morning. Press MODE 7 30 Am : 74 o M COOL Morning Adjust the cooling setpoint for Morning. (35 - 99 ) Press MODE 7 30 Am : 74 o Adjust the heating M COOL setpoint for Morning. (35 - 99 ) HEAT Morning o Press MODE 72 Continued Page 8 Programming 4 Time Periods Programming 4 Time Periods : Start I0 30 Am M Day Adjust the start time for Day. Press MODE I0 30 Am : 75 o M COOL Day Adjust the cooling setpoint for Day. (35 - 99 ) Press MODE Press MODE I0 30 Am o : 75 M COOL HEAT o Day 73 Adjust the heating setpoint for Day. (35 - 99 ) : Start 5 30Pm M Evening Adjust the start time for Evening. Press MODE 5 30Pm : 75...