Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Set the thermostat mode to “OFF” prior to changingsettings in setup or restoring Factory Defaults. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 4Z95 Thermostat TSTATG2111 Tested to Comply with FCC Standards FOR HOME OR OFFICE USE FCc Page i How to Use This Manual A Cond on ng & Hea ng The Table of Contents divides the thermostat features into sections making it easier to quickly find information. The first page of each section contains a more detailed Table of Contents for each section, such as the example page shown below. SECTION 14 Timers and Deadbands Section 14 Contents: Adjusting the Heat/Cool Differential..............................14.2 Adjusting the Cycles Per Hour..................................14.3 Adjusting the Deadband..........14.4 Adjusting the Minutes of Header shows section # and title of section Section contents Run-Time Before the 14 Next Stage...............................14.6 Selecting 2nd Stage Turn Off Temperature.....................14.7 Visible section tab on the side of the page Section and page # Page 14.1 In addition, this manual also has an Index to help you find any information regarding this thermostat quickly. Page ii Glossary of Terms A Cond on ng & Hea ng Auto-Changeover: A mode in which the thermostat will turn on the heating or cooling based on room temperature demand. Cool Setpoint: The warmest temperature that the space should rise to before cooling is turned on (without regards to deadband). Deadband: The number of degrees the thermostat will wait, once setpoint has been reached, before energizing heating or cooling. Differential: The forced temperature difference between the heat setpoint and the cool setpoint. Heat Setpoint: The coolest temperature that the space should drop to before heating is turned on (without regards to deadband). Icon: The word or symbol that appears on the thermostat display. Mode: The current operating condition of the thermostat (i.e. Off, Heat, Cool, Auto, Program On). Non-Programmable Thermostat: A thermostat that does not have the capability of running the Time Period Programming. Programmable Thermostat: A thermostat that has the capability of running the Time Period Programming. Temperature Swing: Same as Deadband. Time Period Programming: A program that allows the thermostat to automatically adjust the heat setpoint and/or the cool setpoint based on the time of day. Page iii Table of Contents A Cond on ng & Hea ng Quick Start Getting to Know YourThermostat Setting Clock Basic Operation Viewing the Outdoor Temperature Programming theDaily Schedule Thermostat DisplayOptionsProgramming RunTime Alerts Electric Heat and Heat Pump Operation Factory Defaults andCalibration Accessories Advanced Setup Table Programming the FanOperation Timers and Deadbands Page iv SECTION 1 Getting to Know Your Thermostat 1 A Cond on ng & Hea ng Section 1 Contents: Front Panel Buttons.....................1.2 Display Features...........................1.3 Page 1.1 A Cond on ng & Hea ng Front Panel 1 Heat or Cool Demand Indicator Backlit LCD Display Mode Red = Heat, Green = Cool HEAT COOL Auto 72 74 68 12:00 Pm sometimes refer-sometimes refer [red to as the ]Cooler Button Warmer Button [red to as the ]ButtonDOWN buttonUP button FAN SETUP PROGRAMOUTDOOR SET CLOCK 72 74 68 12:00 Pm Auto HEAT COOL QUICK RELEASE FOR ACCESSORY PORT (pg. 13.1) Page 1.2 A Cond on ng & Hea ng 1 Display Features Program OnSetup Pm HI 18:88 Am StartStop 88 Service Filter Pan UV Light COOL Outside OFFON MorningAUXHEAT DayNight LOEveningFanOn AUTO 188 88 Mode Indicators -Section 4 Selects the operational mode of the equipment. HEAT - Indicates the heating mode. COOL - Indicates the air conditioning mode. AUTO - Indicates the system will automatically changeover between heat and cool modes as the temperature varies. OFF - Indicates heating and cooling is turned off. PROGRAM ON - Indicates the time period program is enabled to run. Clock -Section 3 Indicates the current time. This clock is also used to programthe time period schedule. Room Temperature Display - Section 5 Indicates the current room temperature and displays the outdoortemperature when selected. Desired Set Temperature - Section 4/5Indicates desired room temperature(s). Outside icon -Section 5 Indicates the temperature displayed is from the optional outdoor sensor. Morning, Day, Evening & Night icons -Section 6 Indicates the day part of the time period program. Page 1.3 A Cond on ng & Hea ng Display Features 1 EveningFanOn AUXHEAT COOL AUTO OFFONMorningDayNight Service Filter Pan UV Light Program OnStartStop Setup Outside LO HI 188 88 88 18:88 Am Pm Setup icon - Sections 6-11 Indicates the thermostat is in the setup mode. Fan On icon -Section 7 Indicates constant, continuous fan operation. When Fan ...