Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
By pressing once on or , the display shows the temperature setting. All subsequent pressures will override your programming up to the next program. To see the weekday and weekend programs, select the AUTO mode and press successively on P button to see the programs appear on the display. The MAN mode allows the user to override the programming. The first time the or is pressed on, the temperature setting is displayed. For all subsequent times pressed on, the temperature setting will change 1 °C (1 °F). 720-110522-A 1/3 The ECONO mode has two (2) programs in which the day, the time and the setpoint have to be programmed. For instance, this operating mode can be used for a cottage installation where the user goes only on weekends. Program 1: Friday 3:00 PM, 20 °C (68 °F) Program 2: Friday 8:00 PM, 15 °C (59 °F) The temperature will be maintained at 20 °C (68 °F) Friday from 3:00 PM to 8:00 PM, and maintained at 15 °C (59 °F) the rest of the week. This gives you a comfortable temperature at your arrival and if you are not going to your cottage for the weekend, there will be only a minimal heating period. To see the ECONO programs, select the ECONO operating mode and press on P button successively to see programs 1 and 2 appear on the display. In ECONO mode, by pressing once on or , the display shows the temperature setting. All subsequent pressures will override your programming up to the next program. PROGRAMMING 1) Adjustment of time and day Note: Select your OPTIONS before adjusting your time, because using the RESET button will set the time back to default 0:00 MO (Monday). Example of setting: Thursday 8:15 AM Use D, H and M buttons to set the time. Once set, press on R button to exit the time and day adjustment mode. Note 1: icon is showing you that the time must be set. Note 2:The thermostat has an automatic return. When such functions as time recording, programs recording, etc., are not completed by pressing on return (R) button, the thermostat will automatically exit the mode after 60 seconds. 2) Typical suggested programs This thermostat can store up to four (4) daily programs for weekdays and four (4) daily programs for the weekend. Also, there is two (2) programs for the ECONO mode. To practice programming use the following example. ProgramnumberTimeTemperaturesetting Weekday programs (Mon...Friday) Program 1 6:30 AM 20 °C (68 °F) Program 2 8:30 AM 15 °C (59 °F) Program 3 4:30 PM 20 °C (68 °F) Program 4 11:00 PM 15 °C (59 °F) Weekend programs (Sat & Sun) Program 1 7:00 AM 20 °C (68 °F) Program 2 8:30 AM 15 °C (59 °F) Program 3 4:30 PM 20 °C (68 °F) Program 4 11:00 PM 15 °C (59 °F) ECONO mode programs (weekend cottage) Program 1 Friday 3:00 PM 20 °C (68 °F) Program 2 Friday 8:00 PM 15 °C (59 °F) 3) Recording the heating programs Select the AUTO mode. Press on P button once. The default values or the last recording of program 1 will be displayed. The default values are: • 20 °C (68 °F) and the time ----: ----. The days Monday to Friday are displayed to show that this program is for weekdays. Press on H and M buttons until 6:30 is displayed. Press on or until 20 °C (68 °F) is displayed. The first program is recorded. Press on P button again to record or modify weekday programs 2, 3 and 4 and weekend programs 1, 2, 3 and 4. Use H, M, or buttons to modify the time and setpoint of programs. Programming is now completed. Press on R button or wait for the "automatic return" to exit the programming mode. Note: A program time left at ----: ---is considered inactive. To reset a program, use P button to select the program, then press on MODE button. To review programs, press on P button successively to see the programs one after the other and make modifications if required. 4) Recording the ECONO programs Select the ECONO mode. Press on P button once. The default values or the last recording of program 1 will be displayed. The default values are : •20°C(68°F)andthetime----:----. Use D, H, M and or buttons to record the day, the time and the setpoint of program 1. Press a second time on P button. The default values or the last recording of program 2 will be displayed. Use D, H, M and or buttons to modify the day, time and setpoint of program 2. Programming is now completed. Press on R button or wait for the "automatic return" to exit the programming mode. CHARACTERISTICS -Model: TH110-SP-P -Electronic programmable thermostat -Supply: 240 VAC, 50/60 Hertz -Load: 20 A maximum, 1 HP -Power: 4800 W @ 240 VAC -Power consumption (off): 860 mW -Approvals: CSA NRTL/C -Display range: 0 °C to 99 °C (0 °F to 99 °F) -Setting range: 5 °C to 27 °C (40 °F to 80 °F) -Storage: -20 °C to 50 °C (-4 °F to 120 °F) -Temperature regulation: 1 °C (1 °F) -Precision: ± 0.5 °C (1 °F) (4800 W) -10 programs: 4 weekday programs, 4 weekend programs and 2 ECONO programs WARRANTY AUBE TECHNOLOGIES INC. ONE (1) YEAR LIMITED WARRANTY This product is warranted against material defects and workmanship in normal use for a period of one year, from the...