Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
In Hold mode, the thermostat will not change its settings by program. 3- Prog Press the Prog (programming) key to set the current time and day (hours, minutes, day of week), and to program the temperature time schedules for the MORN, DAY, EVE, and NITE periods. AUTO DAY COOL : P 4- Mode Press the Mode key to set the thermostat mode to Off, Heat, Cool, or Auto. In Off mode, the heating and cooling systems are both off and do not respond to changes in temperature settings. .. In Heat mode, the heating system responds to maintain your desired heating setting. .. In Cool mode, the cooling system responds to maintain your desired cooling setting. .. In Auto mode, your thermostat will automatically switch between heat and cool to maintain your desired heating and cooling settings. 5- Fan Press the Fan key to set the system fan to Fan Auto or Fan On. In Fan Auto mode, the fan runs only when the system calls for heating or cooling. In Fan On mode, the fan runs continuously. 6- Down Arrow (.) Press the Down Arrow key to lower the desired temperature. 7- Up Arrow (.) Press the Up Arrow key to raise the desired temperature. Note: To check your desired setting without changing it, press the up or down arrow key (. or .) once. 3 DISPLAY The following icons will be displayed during normal operation: FANAUTOMORNDAYEVENITEREMOTEHOLDHEATOFFCOOL:: OUTSIDEDESIREDA 1- Temperature Display Shows the current temperature, desired temperature, or heating and cooling settings. 2- Time Display Shows the current time of day. 3-DESIRED DESIRED is displayed when the temperature display shows the desired temperature setting. 4-OUTSIDE .. OUTSIDE will be displayed when the temperature display shows the outdoor temperature. The outdoor temperature will be displayed every 4 seconds. 4 5-• The • is displayed when the heating or cooling system is running. 6-COOL COOL is displayed when the system is in Cool mode. 7-AUTO AUTO is displayed when in automatic changeover mode. 8-HEAT HEAT is displayed when the system is in Heat mode. 9-FAN FAN is displayed when the fan is set to run continuously. 10-OFF OFF is displayed when the system is in the Off mode. 11-REMOTE .. REMOTE is displayed when the last command received by the thermostat was sent by a remote system. 12- Period Indicators MORN, DAY, EVE, or NITE is displayed when scheduled temperature changes are made by the thermostat programs. 13-HOLD HOLD is displayed when the system is in Hold mode. 5 FILTER REMINDER Your thermostat logs the amount of time your heating and cooling system has been running and gives you a reminder when it's time to replace your filter. " F I Lt" will be displayed every four seconds in the place of the time display when it is time to change you filter. To clear the reminder, press the Prog key. The display will return to normal in 10 seconds. Don't forget to change your filter! ANTICIPATION Your thermostat has a sophisticated control system designed to keep you comfortable while saving energy. Part of the ...
Эта инструкция также подходит к моделям:Термостаты - OMNISTAT RC-80BZ (238.14 kb)
Термостаты - OMNISTAT RC-80BZ (238.14 kb)
Термостаты - OMNISTAT RC-80BZ (238.14 kb)
Термостаты - OMNISTAT RC-80B (238.14 kb)