Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
For each of the higher rates, MID, HI and CRIT, you can easily set the number of degrees of variation by changing the VAR (variation) settings for the rate. The rate currently in effect is provided to the thermostat by the energy provider's meter or other device. The thermostat will raise the cool setting or lower the heat setting by the amount that you select for the higher rates. The thermostat display will show which rate is in use by periodically flashing RATE-LO, MID, HIor CRITin the time display. AUTO RATE DAY COOL The thermostat remembers your original settings, and will show them if you press the up or down arrows to see the desired settings. 6 The thermostat will control using the original setting and the variation for the rate in use. For example, if your heat setting is 68 degrees, the rate is hi, and the variance for hi is set to 3, the thermostat will control to 65 degrees. Real time pricing variations can be used with or without the programming feature of the thermostat. SETTING THE CURRENT TIME AND DAY To set or change the current time and day, press and release the Prog key. The hour will blink. 1. Use the arrow keys (U-U) to change the hour. :: P OFF 2. Press the Prog key to advance to minutes. 3. Use the arrow keys (U-U) to change minutes. :: P OFF 4. Press the Prog key to advance to day of week. 5. Use the arrow keys (U-U) to set the day of week (1=Monday - 7=Sunday). 7 :: P OFF DAY :: P OFF DAY Press the Mode key when complete, or simply wait 8 seconds for the display to return to normal. PROGRAMMING Your thermostat may be programmed to set the variance for higher energy rates and to adjust the heat and cool settings up to 4 times per day (MORN, DAY, EVE, NITE). You can setup a temperature time schedule for weekdays, Saturday, and Sunday. When in programming mode: 1. The item that is being programmed will flash. 2. The up arrow key (U) is used to increase the value. 3. The down arrow key (U) is used to decrease the value. 4. The Prog (>) key is used to advance to the next item. 5. The Hold (<) key is used to return to the previous item. 6. To exit programming mode, press the Mode key. The thermostat will automatically exit programming mode after 20 seconds of no key activity. SETTING THE VARIATION FOR HIGHER RATES To view or change the variation for MID, HI and CRIT rates, press the Prog key four times. The display will show RATE MID. The variation, in degrees, for the MIDrate will flash: 8 RATE VAR RATE VAR 1. Use the arrow keys to change the variance for the MIDrate. 2. Press the Prog key to advance to the HIrate. Use the arrow keys to change the variance for the HIrate. 3. Repeat step 2 for the CRIT(critical) rate. (Typical settings for variance are: MID: 1, HI: 3, CRIT: 6) OVERRIDING THE VARIATION SETTINGS To override the real time pricing system, put the thermostat in Hold mode by pressing the Hold key. HOLD is displayed when the system is in Hold mode. The thermostat will run at the desired setpoint without adjusting for the rate. The thermostat will resume rate variation adjustments when the Hold mode is turned off. SETTING TIME SCHEDULES When programming a time for the Morning, Day, Evening, or Night period, the time will be increased or decreased in 15 minute increments. If the up arrow is pressed at 11:45 PM, or the down arrow is pressed at 12:00 AM, the time display will be blank, indicating that no scheduled temperature changes will be made for that period. Your thermostat will follow a set of time scheduled programs on weekdays (Monday-Friday), on Saturday, and on Sunday. This will allow you to have different heating and cooling settings on Saturday and Sunday, than you normally would have for weekdays (Monday Friday). When programming the time schedules, the weekday time schedule is programmed first. The Saturday time schedule is programmed second, and the Sunday time schedule is programmed last. 9 To view or change the programmed time schedules of your thermostat, press the Prog key four times (seven times if real time pricing is in use). The weekday MORNtime will flash. 1. Use the arrow keys (U-U) to change the scheduled time for the displayed period (MORN, DAY, EVE, or NITE). :: A MORN DESIRED 2. Press the Prog key to advance to the next item. 3. Use the arrow keys (U-U) to change the desired cool setting. MORN COOL DESIRED :: A 4. Press the Prog key to advance to the next item. 5. Use the arrow keys (U-U) to change the desired heat setting. MORN DESIRED :: A HEAT 6. Press the Prog key to advance to the next period. 10 Repeat steps 1-6 for the DAY, EVE, and NITE periods. Afterwards, repeat steps 1-6 for 4 daily periods on Saturdays (Day 6), and 4 daily periods on Sundays (Day 7). The temperature display will show "6" for Saturdays, and "7" for Sunday times. SYSTEM MODE Your thermostat can be connected to an automation system or personal computer. With network software, the remote system can send commands to the thermostat to change mode, cool setting, heat setting, statu...
Эта инструкция также подходит к моделям:Термостаты - RC-81 (68.76 kb)
Термостаты - RC-81 (68.76 kb)