Оценок - 4, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
(as shown in photo H) 3. The square mounting hole patterns are VESA standard on 100 mm (3.9 centers, as shown in photo I). Mount the unit to mounting device using the four mounting holes on the rear panel. Photo G Photo H Photo I 4 1 Bosch Security Systems | 6 July 2005 MON170CL | Instruction Manual | Operation EN | 10 5.8 Ventilation To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not covered. Color Temp. (For CVBS/S-VIDEO only) 6.0 6.1 (i) Input +/- OPERATION Front Panel Controls (Figure 1) • Press this button to display the input signal which is selected on the screen • Press the button to exit OSD menu. • Press the ‘+’ or ‘-’ button to move the cursor to the targeted parameter in the OSD main menu. • Press the ‘+’ or ‘-’ button to adjust the value of the selected parameter in the OSD sub-menu. (M) MENU • Press this button to open the main OSD menu. Use this button to confirm a value for a parameter in the OSD Menu. Power LED • Power on (Green) Identification • Stand by (Amber) • Sleeping mode (Flashing Amber) POWER • Press this button to turn on or turn off the monitor. 6.2 6.2.1 & On -Screen Display (OSD) Menu CVBS/ S-VIDEO/ VGA Mode Luminance ( B Contrast: Adjusts the contrast value. (0-100) Brightness: Adjusts the brightness value. (0-100) 3 Tint: Adjusts the tint value (NTSC only). (0-100) Color: Adjusts the color value. (0-100) ©°k Color Temp. (For VGA only) Selecting "User" will display the following menu: R (Red): Adjusts the red color contrast. G (Green): Adjusts the green color contrast. B (Blue): Adjusts the blue color contrast. Bosch Security Systems | 6 July 2005 MON170CL | Instruction Manual | Operation EN | 11 l77j Input Select OSD OSD Setup OSD Setup g! H,Position 50 ffl u.Position 1 .......... pg 50 m OSD Timeout 1 10 0 H. Position: Adjusts the OSD horizontal position. (0-100) V. Position: Adjusts the OSD vertical position. (0-100) OSD Timeout: Adjusts the OSD window display time. (0-100) (J) Information (For CVBS/S-VIDEO only) © Information (For VGA only) a Reset Reset .....m Yes! NO Reset: Returns the monitor setting to the factory default. Exit Exits the OSD menu. Language: Select the language to be used in OSD. [English / Français / Italiano / Deutsch / Español]. Bosch Security Systems | 6 July 2005 MON170CL | Instruction Manual | Operation EN | 12 6.2.2 VGA Mode Only ljiljil Image Setup 6.3 Notation The message "Input Not supported " will be displayed in the VGA mode if the PC is operating with either a resolution or timing mode that is not supported by the MON170CL. ill ill Focus: Adjusts the focus value. (0-100) I Clock: Adjusts the clock frequency. (0-177) Image Position m H. Position: Adjusts the horizontal position. (0-100) I1 ’I V. Position: Adjusts the vertical position. (0-100) Bosch Security Systems | 6 July 2005 MON170CL | Instruction Manual | On-Screen Display Menu Configuration 7.0 ON-SCREEN DISPLAY MENU CONFIGURATION EN | 13 7.1 CVBS/ S-VIDEO Mode Bosch Security Systems | 6 July 2005 MON170CL | Instruction Manual | On-Screen Display Menu Configuration EN | 14 7.2 VGA Mode VGA Luminance Image Setup Image Position Color Temp. Input Select OSD Setup Language Information Reset Exit Contrast Brightness Focus Clock H. Position V. Position 9300 K 6500 K User VGA S Video CVBS H. Position V. Position OSD Timeout English Deutsch Français Español Italiano 1024x768 H: 60 KHz V: 60 Hz VGA Input Yes No Bosch Security Systems | 6 July 2005 MON170CL | Instruction Manual | Technical Specification EN j 15 8.0 Appendix A - Technical Specification Electrical Rated Voltage 120/230 VAC, 50/60 Hz Voltage Range 100 to 240 Power at Rated Voltage 30 W Sync Format PAL/NTSC LCD Panel TFT LCD Screen Size 338.0 (H) x 270.3 (V) mm (13.3 x 10.6 in.) Viewable Picture Area 43 cm (17 in.) measured diagonally Pixel Pitch 0.264 (H) x 0.264 (V) mm Resolution 1280 (H) x 1024 (V) pixels; 500 TV Lines Typical Aspect Ratio 4:3 (Composite Video); 5:4 (VGA) Display Colors 8 bits Interface; 16 million colors Response Time 16 ms Backlight Four (4) cold Cathode Fluorescent Tubes, rated life 50,000 hours, at 50% brightness Optical Characteristics Luminance 300 cd/m2 Contrast Ratio 450:1 Viewing Angle 140° horizontal, 130° vertical Video Input Composite Video (CVBS) 1.0 Vp-p (0.5-1.5 Vrms) Y/C (S-video) 0.7 Vp-p (Y-signal), 0.3 Vp-p (C-signal), 75 ohm termination VGA Input Analog RGB 0.7 Vp-p (0.5-1 Vrms) VGA Timing Modes Fh: 30 K - 80 KHz Fv: б0 - 75 Hz б40 x 480 б0/72/75 Hz 800 x б00 б0/72/75 Hz 1024 x 7б8 б0/70/75 Hz 1280 x 1024 б0/75 Hz Audio Input 1.0 V line level Audio Output Speaker: Two (2), 1 W Controls Front Panel Push-buttons I (Input) Selects CVBS, S-Video, VGA Input M (Menu) Selects On-Screen Display (OSD) Adjustment Decrease + Adjustment Increase Power On/Of...