Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
(P43) POWER ON-OFF BUTTON Used to turn projector on or off. (P22) MENU BUTTON Used to select MENU operation. (P20, 21) INPUT 1/2 BUTTON LASER BUTTON Used to operate Laser Pointer Function. Laser beam is emitted while pressing this button within 1 minute. When using this Laser Pointer for more than 1 minute, release LASER button and press it again. Used to move a pointer on ON-SCREEN MENU, adjust each item, or pan image in DIGITAL ZOOM +/– mode. (P34) It is also used as a PC mouse in Wireless Mouse Operation. (P43) . When pressing center of this button, it works as SELECT button. POINT BUTTON Used as a PC mouse in Wireless Mouse Operation. (P43) RIGHT CLICK BUTTON Used to operate P-TIMER function. (P24) Lights red while laser beam is emitted from Laser Light Window. LASER POINTER INDICATOR P-TIMER BUTTON SELECT BUTTON INPUT 3/4 BUTTON Used to select input source either INPUT 3 or INPUT 4. (P26) This Remote Control Unit emits a laser beam as laser pointer function from Laser Light Window. When LASER button is pressed, laser light goes on. And when LASER button is being pressed for more than 1 minute or LASER button is released, light goes off. LASER POINTER INDICATOR lights RED while laser beam is emitted from Laser Light Window. Laser emitted is a class II laser; therefore, do not look into Laser Light Window or shine laser beam on yourself or other people. Three marks bellow are caution labels for laser beam. CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result hazardous radiation exposure. Laser Light Window These caution labels are put on remote control. LASER POINTER INDICATOR 18 BEFORE OPERATION Used to adjust zoom. (P23) VOLUME ON-OFF FOCUSZOOM D.ZOOM MENU MUTE LASER KEYSTONE NO SHOW FREEZE AUTO PC ADJ. IMAGE P-TIMER LOCK INPUT 1/2 INPUT 3/4 LENS SHIFT MUTE BUTTON Used to mute sound.(P25) ZOOM BUTTON FOCUS BUTTON Used to adjust focus. (P23) NO SHOW BUTTON Used to turn picture into black image. (P24) AUTO PC ADJ. BUTTON Use to operate AUTO PC Adjustment function. (P29) VOLUME BUTTON Used to adjust volume. (P25) D.ZOOM BUTTON Used to select DIGITAL ZOOM +/– mode and resize image. (P34) KEYSTONE BUTTON Used to correct keystone distortion. (P23, 40) FREEZE BUTTON Used to freeze picture. (P24) IMAGE BUTTON Used to select image level. (P32, 37) LENS SHIFT BUTTON Used to select LENS SHIFT function. (P23) WIRED REMOTE JACK Operating Range Point Remote Control Unit toward projector (Receiver Window) whenever pressing any button. Maximum operating range for Remote Control Unit is about 16.4’ (5m) and 60° in front and rear of a projector. 16.4’ (5 m) 60° 16.4’ (5 m) 60° When using as Wired Remote Control, connect Remote Control Cable to this jack. Battery installation is required when using as Wired Remote Control. Press lid downward and slide it. Remove battery compartment lid. Slide batteries into compartment. Replace compartment lid. Two AA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in compartment. Remote Control Batteries Installation 1 2 3 To insure safe operation, please observe following precautions : Use (2) AA, UM3 or R06 type alkaline batteries. Replace two batteries at same time. Do not use a new battery with an used battery. Avoid contact with water or liquid. Do not expose Remote Control Unit to moisture, or heat. Do not drop Remote Control Unit. If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries. Danger of explosion if battery is incorrectly replaced. Dispose of used batteries according to the batteries manufacturers instructions and local rules. BEFORE OPERATION HOW TO OPERATE ON-SCREEN MENU OPERATING ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. 2 MOVING POINTER 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. Move pointer (. see below) or adjust value of item by pressing POINT button(s) on Side Control or on Remote Control Unit. WIRELESS REMOTE CONTROL POINT BUTTON Used to move Pointer UP/ DOWN/ RIGHT/ LEFT. SELECT BUTTON Used to select item. . Pointer is a icon on ON-SCREEN MENU to select item. See figures on section "FLOW OF ON-SCREEN MENU OPERATION" below. POINT BUTTONS Used to move Pointer UP/ DOWN/ RIGHT/ LEFT. MENU LENS SHIFT I AUTO PC ADJUST IMAGE SELECT I SIDE CONTROL 3 SELECT ITEM Select item or set selected function by pressing SELECT button. SELECT BUTTON Used to select item. FLOW OF ON-SCREEN MENU OPERATION Display ON-SCREEN MENU MENU BAR MENU ICON 1 2 POINTER (red frame) SELECT BUTTON POINTER (red frame) Press POINT DOWN button to move POINTER. ITEM Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Select Menu to be adjusted Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons. Control or adjust item through ON-SCREEN MENU...
Эта инструкция также подходит к моделям:Телевизоры - MULTIMEDIA PROJECTOR LC-UXT3 (1.03 mb)
Телевизоры - MULTIMEDIA PROJECTOR LC-UXT3 (1.03 mb)