Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
If you have progressive DVD player, connect the cables with same connection. Connecting an S-Video Device Figure 2. Connecting an S-Video Device. Figure 1. Connecting the DVD player. S-Video Device (Figure 2) 1 Connect an S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1, INPUT-2, INPUT-3, or INPUT-4 on the TV back panel or INPUT-5 on the TV front panel. 2 Connect a set of audio cables from AUDIO OUT on the device back panel to AUDIO INPUT-1, INPUT-2, INPUT-3 or INPUT-4 on the TV back panel or INPUT-5 on the TV front panel. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. If your device is mono (non-stereo), connect only the white (left) cable. Connecting a DVD player or S-Video Device 60 Hz Y/G AUDIO-L AUDIO-L (MONO) AUDIO-R AUDIO-L (MONO) AUDIO-R LOOP OUT IR - EMITTER ANT-A ANT-B 1 2 1 2 S-VIDEO VIDEO 3 4 MONITOR PIP Pr Y AUDIO-R Pb AUDIO-L AUDIO-R Pr/R H V Pb/B PC - 1 VGA / SVGA / XGA COMPONENT 480i / 480p HIGH RESOLUTION INPUTS DTV INPUT OUTPUT 1080i / 720p / 480i / 480p AUDIO OUT AUDIO IN VIDEO OUT L (Y/C) R L R 1 2 TV back panel S-Video Device 1 2 2 1 White Red White Red 60 Hz Y/G AUDIO-L AUDIO-L (MONO) AUDIO-R 1 2 Pr Y AUDIO-R Pb AUDIO-L AUDIO-R Pr/R H V Pb/B PC - 1 VGA / SVGA / XGA COMPONENT 480i / 480p HIGH RESOLUTION INPUTS DTV 1080i / 720p / 480i / 480p VIDEO S Y CB CR VIDEO OUT 5.1 CH SURROUND 2CH BITSTREAM/PCM L R CENTER SUBWOOFER SURROUND FRONT COAXIAL OPTICAL AUDIO OUT MITSUBISHI AC IN DVD PLAYER MODEL DD-5000 POWER SUPPLY 120V~ 60Hz POWER CONSUMPTION 20W MITSUBISHI DIGITAL ELECTRONICS DISTRIBUTED BY 9351 JERONIMO ROAD IRVINE, CA 92618 MADE IN JAPAN AMERICA, INC. SERIAL NO. MANUFACTURED 1 2 3 White Red White Red DVD back panel TV back panel 1 2 3 5 4 5 4 20 Part II : Installation Connecting a DTV Receiver DTV Connections and Adaptors (Figure 1) The TV back panel has 5 RCA-type connectors, for the DTV connection. The back panel of your DTV receiver may use RCA-type connectors or BNC-type connectors. If your DTV receiver comes with BNC type connections, you will need to purchase BNC to RCA adaptors to connect the TV to the DTV receiver. These adaptors should be available at most electronic supply stores. DTV Receiver with Component Video Connections (Figure 2) 1 Connect the outside antenna, cable, or satellite to ANT, or SATELLITE IN on the DTV receiver (see your DTV receiver’s owner’s guide for instructions, and cable compatibility). 2 Connect the RCA-type cables from the Y/ Pr/Pb outputs on the DTV receiver to HIGH RESOLUTION INPUT Y/Pr/Pb on the TV back panel. You may need to set the DTV input assignment to YPrPb in the Assign Input Menu, page 33. 3 Connect the L (left) and R (right) audio cables from the DTV receiver and to DTV AUDIO on the TV back panel. To utilize the benefits of a digital A/V receiver, connect your DTV receiver’s digital audio out to a digital input on your digital A/V receiver. The H and V connections on the TV back panel are not used when connecting component video (Y/Pr/Pb). Connecting a DTV Receiver Figure 2. Connecting the DTV receiver with component video connections. Figure 1. DTV connectors and adaptors. See Appendix B, page 59, for component video signal compatibility information. For digital audio connections, see your DTV receiver and A/V receiver Owner’s Guides. BNC to RCA BNC Adaptor Connector Adaptor Fitted to Connection RCA Connector or 60 Hz Y/G AUDIO-L AUDIO-L (MONO) AUDIO-R AUD (MO AUD LOOP OUT IR - EMITTER ANT-A ANT-B 1 2 1 2 S-VI VID 3 4 MONITOR PIP Pr Y AUDIO-R Pb AUDIO-L AUDIO-R Pr/R H V Pb/B PC - 1 VGA / SVGA / XGA COMPONENT 480i / 480p HIGH RESOLUTION INPUTS DTV INPUT OUTPUT 1080i / 720p / 480i / 480p AUDIO AUDIO VIDEO VIDEO L R L R Y Pr Pb S-VIDEO VCR CONTROL DIGITAL AUDIO OUT PHONE JACK RF REMOTE IN FROM ANT SATELLITE IN OUT TO TV ..CH 3 CH 4 CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN White Red TV back panel 2 1 2 2 2 3 2 3 2 1 21 Part II: Installation Connecting a DTV Receiver Connecting a DTV Receiver Figure 1. Connecting the DTV receiver with RGB video connections. DTV Receiver with RGB Video Connections (Figure 1) 1 Connect the outside antenna, cable, or satellite to ANT, or SATELLITE IN on the DTV receiver (see your DTV receiver’s owner’s guide for instructions, and cable compatibility). Connect the RGB cables from the DTV receiver to the HIGH RESOLUTION INPUT GRBHV on the TV back panel. You may need to set the DTV input assignment to RGB in the Assign Input Menu, page 33. DTV Receiver TV Back Panel 2 G (green) = Y/G 3 R (red) = Pr/R 4 B (blue) = Pb/B If the DTV receiver has outputs for H and V sync, connect as listed below (DO NOT connect if DTV receiver uses “Sync on Green”): 5 H (horizontal sync) = H 6 V (vertical sync) = V 7 Connect the L (left) and R (right) audio cables from the DTV receiver and to DTV AUDIO on the TV back panel. To utilize the benefits of a digital A/V receiver, connect your DTV receiver’s digital audio out to a digital input on your digital ...
Эта инструкция также подходит к моделям:Телевизоры - WD-65000 (2.08 mb)
Телевизоры - WD-65000 (2.08 mb)