Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad. 4) Release the DISPLAY button, and confirm the operation of the DVD player. • If your DVD player does not respond to the first code, try the others listed. If it does not respond to any of the codes, try the search codes function on page 28. • After you program your remote, some DVD buttons may not work properly. If so, use the DVD player’s remote. DVD Player CODES DVD Player CODES Aiwa 043 RCA 021, 026 Apex 040 Sampo 034 Denon 020, 037 Samsung 030 Hitachi 030, 031 Sharp 028 JVC 000 Silvania 038 Kenwood 035 Sony 024, 045, 046, 047Konka 039 Mitsubishi 025 Technics 020 Onkyo 041 Toshiba 023 Oritron 044 Vialta 050 Panasonic 020 Wave 042 Philips 023, 036 Yamaha 020 Pioneer 022 Zenith 027, 032 Raite 033 27 Remote Programming Search Codes Remote Programming Search Codes Cable/Satellite Search Codes Function 1) Slide the first 2-Way Mode Selector switch to CATV. 2) Press the POWER and RETURN+ buttons. Hold for at least three seconds and release. 3) Press the POWER button on the remote, and see if the cable or satellite box responds. 4) If there was a response, press RETURN+. The codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the remote control that came with your equipment. 5) Press RETURN+ to exit. VCR/DVD Search Codes Function 1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or “DVD”. 2) Press the VCR or DVD POWER and RETURN+ buttons. Hold for at least three seconds and release. 3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds. 4) If there was a response, press RETURN+. The codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for the DVD player), and there is no response, use the remote control that came with your equipment. 5) Press RETURN+ to exit. 28 Onscreen Menus Using the Guide Onscreen Menus Using the Guide Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are: .† Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH– buttons let you: • Move vertically in a main menu screen • Move through a submenu screen • Move to the next letter, number, or other choice in a submenu • Back up to correct an error • Scan through TV channels (when not in a menu screen) v® Left and right arrows mean press the VOLUME+ or VOLUME– buttons to move left or right to: • Select a highlighted menu item • Select an item in a submenu • Select numbers in certain menu options • Turn the volume up or down (when not in a menu screen) The “press button” icon means you should press the button named on your remote control. (Button names appear in SMALL CAPITAL LETTERS.) The “helping arrow” icon points to the highlighted or selected item in a menu. To bring up the onscreen menu, press the MENU button on the remote control. The item that appears in green is the one currently selected. If you use the Menu button on the TV’s front panel instead of the remote, an additional menu screen showing INPUT, VIDEO STATUS and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive plug-in menu” will appear the first time the TV is plugged in. NEXT PAGE PREVIOUS AUTO TUNER SETUP CHANNEL SUMMARY V-CHIP SET LOCK CODE CONVERGENCE AUTO DEMO INITIAL SETUP SELECT OPERATE OFF (4/4) EXITMENU Note: • Menus shown in this book are illustrations, not exact replications of the television’s onscreen displays. 29 Onscreen Menus The Onscreen Menu System Onscreen Menus The Onscreen Menu System Your television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly. Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide. For information about the interactive plug-in Menu, see pages 22 - 24. The Onscreen Menu System To open the onscreen menu system, press the MENU button on the remote control. You navigate within the onscreen menus by using the four directional arrow buttons on the remote control. (These buttons are also the CH +/– and VOL+/– buttons. Channel and volume functions will not operate when the onscreen menu is active). The selected feature and option on a menu screen are highlighted in a different color. Selected Option FRAN. ESP. LANGUAGE ENG. Selected Option (Green) CLOSED CAPTION (Blue) To move to a different feature use the .† arrows to move up or down the list. When you press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen will appear. Use the arrows v ® to sel...