Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 2.65 STRATEGY SERIES® II 4" SPEAKER SYSTEMS FAP42TC ONE FEATURES • Low depth (4") speaker system for limited space applications • Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (Included) • Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation • "Press fit" grilles blend better into contemporary architecture • Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintan low frequency response while providing increased output for higher SPL applications • UL Listing Pending APPLICATIONS FAP42TC combines superior coaxial loudspeaker performance with wide dispersion and easy installation. A low profile enclosure and wide coverage make the FAP42TC a perfect choice for low ceilings. The FAP42TC will satisfy the needs of owners, architects, contractors, and consultants by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system. The FAP42TC is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications. GENERAL DESCRIPTION The FAP42TC’s 130 degree dispersion angle effectively reduces the number of loudspeakers necessary to achieve coverage in distributed systems with low ceilings. The loudspeaker component matches the performance of the legendary Atlas Sound Strategy FA Series. High quality construction 1" voice coil 4" coaxial cone type driver includes polypropylene cone with a butyl rubber surround. The 19mm coaxially mounted tweeter is constructed of PEI. This loudspeaker is factory assembled to an optimally tuned & ported deep drawn enclosure and includes a specially designed 16 watt low saturation 70.7V/100V transformer. A convenient front mounted selector switch allows tap selection without the need to remove the speaker from the ceiling. This switch also includes a transformer bypass setting for 8 ohm operation. MOUNTING ACCESSORIES Mounting is simplified with Strategy style "dog leg" tabs that allow easy installation into drop tile or drywall ceilings with provided tile bridge assembly. The tile bridge consists of (2) "V" shaped formed mounting rails and a C-ring assembly. The C-ring can be attached to the rails with the screws provided to extend support to the T-bar grid in suspended ceiling applications. Multiple hole locations are provided to allow the C-ring to be positioned to the outer edge the tile if necessary. For existing dry-wall applications the tile bridge c-ring and support rails can be inserted into the hole cut for the FAP42TC. For easy positioning the "V" shaped support rails match the shape of the C-ring tabs for easy maneuvering and location when working "blindly" above the deck. A uniquely designed "easy access" input panel on the side of the enclosure allows for conduit runs using flexible conduit. Wiring Terminals are concealed below this cover for easy daisy chain wiring to other full range loudspeakers or Atlas Sound FASUB70 subwoofers. The package includes an attractive press-fit grill which nicely matches contemporary architecture. For new construction drywall ceiling applications, the optional FAP42-TR trim ring is available. This unit provides a marked location for drywall installers to cut around essentially reserving the desired location in the ceiling until final installation of FAP42TC. Mounting holes are provided to accommodate 16" or 24" OC stud/joist mounting. A support ring is also provided on the top of the FAP42TC enclosure to facilitate an auxiliary support cable. NOTE: IT IS MANDATORY THAT THIS SECONDARY SUPPORT BE UTILIZED IN DROP CEILINGS FOR SAFETY AND SEISMIC CONSIDERATIONS). FAP42TC Shown without grille (included) (included) C-Ring/V-Rail Mounting System (optional) FAP42-TR PEFORMANCE SPECIFICATIONS MODEL POWER 70.7V FREQUENCY SENSITIVITY WOOFER WOOFER HF DIMENSIONS ENCLOSURE CUT-OUT WEIGHT-LESS RATING TAPS RESPONSE (±7dB) (1W/1M) MAG WT. DRIVER VOLUME DIMENSION TILE BRIDGE FAP42TC 25 Watts 1, 2, 4, 75Hz - 20kHz 88dB 4" Poly Cone 10 oz Coaxially Mounted 10.5" (267mm) Dia 134 Cubic 9" 5.4 lbs. (Transformer) 8, 16 Average Butyl Rubber (364g) PEI Dome 4.24" (108mm) H Inches (229mm) (2.45kg) Limited Specifications subject to change without notice AtlasSound.com 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 2.65 © 2004 Atlas Sound Printed in U.S.A. 001004 ATS001871 RevB 10/04 SL1-2049 Specifications subject to change without notice AtlasSound.com 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 © 2004 Atlas Sound Printed in U.S.A. 001004 ATS001871 RevB 10/04 SL1-2049 One ARCHITECT AND ENGINEER SPECIFICATIONS The loudspeaker system shall be Atlas Sound FAP42TC. System shall include a high performance 4" coaxial loudspeaker, low profile enclosure an...